Active Member
|
[China]
Address: North Industry Zone , Huanyang , Zhejiang Province, China
Contact name:Lisa Lee
Taizhou Huyang Reliable Machinery Co.,Ltd |
|
|
New Developed Energy Saving Plastic Injection Machine /Plastic Bottle Cap Making Machine
Features of Plastic Injection Machine
Energy Saving Plastic Injection Machine adopts Europe technology,hydraulic unit adopts proportional pressure and flow control,the pressure and the speed can be adjusted,stable movement curve and gentle shock,the computer is imported from Industry family. The LCD displaying screen with high clarity has Chinese and English language to use. Close-loop PID temperature control with the advantage of high precision. The operating table of the injection moulding machine have two safety, one is machine safety, another is electrical safety, that ensures the operators’s safety.
Mould Our mould producing center produces exact mould ,adopts the high grade material to make. The perform mould uses the hot runner technology, inside uses the imported steel, the surface’s brightness is very high and the service time is very long.
The design of equipment is logical, easily operation.
The automatic level is very high, the wage is very little.
Using famous imported hydraulic, electrical, sealing parts, the trouble is low.
No matter what the product’s outside or inside, they can get the best guarantee, the good products rate can be above 99%.
New Developed Energy Saving Plastic Injection Machine /Plastic Bottle Cap Making Machine
A Injection Unit
•A07) Oil temperature indication
•A08) Adjustable such back before and after refilling
•A09) Auto sprue break
•A10) Linear transducer to control programmable injection position
•A11) Cold start screw prevention
•A12) Sliding Mechanism for hopper
•A13) Gas Nitrated hardened screw and Barrel
•A14) Screw back pressure con troll with pressure relief valve
•A15) Hand Operated Lubrication Unit
B. Clamping Unit
•B01) Five Point twin toggle locking system
•B02) Case Hardened toggle, Brackets and links with hardened PIN & BUSH
•B03) Motorized mould height adjustment for quick mould change
•B04) Auto tonnage setting facility
•B05) Low pressure precise mould protection with pressure and time setting
•B06) Five stage Mould closing
•B07) Five stage Mould opening
•B08) Hydraulic cushioning for consistent mould opening position
•B09) Linear transducer to control programmable clamp system
•B10) Electrical and hydraulic (Dump value) interlock safety gate
•B11) Moving platen with mechanical support with Teflon
•B12) Hydraulic Ejector with Multi stroke
•B13) Auto lubrication unit
C. Ejector
•C01) Linear transducer to control programmable ejector position
•C02) Multiple stroke ejection
•C03) Ejector forward/ backward speed adjustable
•C04) Ejector forward/ backward pressure adjustable
•C05) Two stage in ejector forward/ backward operation
•C06) Additional safety of sensing ejector backward position with proximity switch
D. Hydraulic
•D01) Compact and Simple design
•D02) Sealing ring imported from Japan, a total four leak-proof protection to
prevent the oil leakage.
•D03) Proportional value for pressure and speed
•D04) Variable displacement pump system attached with pulse absorber
•D05) High magnetic closed-loop oil filter to effectively remove debris of the oil, the filtration is up to 10um.
•D06) Easy access to hydraulic elements for ease maintenance
E. Controller of New Developed Energy Saving Plastic Injection Machine
•E01) Display type LCD QVGA B/W of 5.7 “with 100 membrane keys
•E02) Multi-CPU control, with 32 bit
•E03) Precise temperature control, the precision is of ±1 degree
•E04) Four forms of switch at the end of injection, they are time,
location, pressure, and speed.
•E05) Breaker and air switch are imported from Japan, the brand of
Micro switch is Omron
•E06) Instruction cycle time of controller in 0.4 microseconds
Technical Data
Item | Unit | Data | ||
Max. clamping force | KN | 950 | ||
Max. opening force | mm | 340 | ||
(V×H)Space between tie bars | mm | 360×360 | ||
(min-max)Mould height | mm | 135-380 | ||
Max. daylight | mm | 720 | ||
Ejector force | KN | 25.4 | ||
Ejector stroke | mm | 85 | ||
Ejector quantity |
| 5 | ||
Screw diameter | mm | 30 | 35 | 40 |
Screw L/D ratio | L/D | 24.5 | 21 | 18.4 |
Theoretical shot volume | cm3 | 113 | 154 | 201 |
Plasticising weight(PS) | g | 103 | 140 | 183 |
Injection pressure | Mpa | 249 | 183 | 140 |
Theoretical injection rate(PS) | g | 67.5 | 91.8 | 120 |
Plasticising capacity(PS) | g/s | 8.3 | 12.5 | 18 |
Screw torque | N.m | 510 | ||
Max. screw rotate speed | r/min | 260 | ||
Injection stroke | mm | 160 | ||
Pump motor power | KW | 11 | ||
Pump pressure | Mpa | 16 | ||
Heating power | KW | 7.3 | ||
Heating zone |
| 4 | ||
Size | m | 4.25×1.2×1.8 | ||
Net weight | t | 3.2 | ||
International designation |
| 950-280 | ||
Parts Specification
No | Spare parts | brand | origin |
1 | Hydraulic plastising motor | ZY | Italy |
2 | Hydraulic pump | YUKEN | Japan |
3 | Proportional hydraulic valve | YUKEN | Japan |
4 | Reversal valve | YUKEN | Japan |
5 | Transducer | LION | Japan |
6 | Sealing rings | VALQUA | Japan |
7 | Pressure match | LIMING | Italy/Japan |
8 | Auto lubrication system | ISHAN | China&Japan |
9 | High pressure oil pump | KIMBERLEY | Germany |
10 | Contactor | SHINAIDE | France |
11 | Solid State Relay | FORTEK | Taiwan |
12 | Air break switch | SIHNAIDE | France |
13 | Computer control | JINGHUA | Taiwan |
14 | High temperature wire | ------------- | Japan |
15 | Limited switch | NATIONAL | Japan |
16 | Proximity switch | FORTEK | Taiwan |
What Reliable Machinery Co.,Ltd can offer you ?
Our products include: Liquid filling machines (water, fruit juice/tea, carbonated drink, oil, alcohol, plant protein drink, etc.), Barreled filling line (3-5 gallon) Water treatment machines, Labeling & packing machines, semi-automatic /full automatic bottle blowing machines, and injection molding machines.
Reliable Machinery can provide turn-key services for customers, from plant layout, equipment manufacture and production line installation to operator training and other after-sales services .
