Active Member
|
[China]
Address: No. 129 Mid-Changjiang Road, Erqi District, Zhengzhou, Henan, China
Contact name:Joe
Zhengzhou Liseron Oil Pump & Nozzle Co., Ltd. |
|
|
^-^ ---------Nozzle Picture
^-^ ---------ERIKC hot product
Mainly producing and selling CR injectors, nozzles, control valves,
valve bonnets, CRIN repair kits, injector adjusting shims, common
rail injector testers and repair tools. Besides our own brand
"HAOTENG" and "DYD", we are also the sole agent of UK ERIKC (the
former OEM factory of famous international brand common rail
Parts).
^_^ -------Shipping
FAQ: What does the term static means?
ERIKC Answer: If an ERIKC injector stays on all the time, 100% duty cycle, it is said to be static. Injectors should never go static because control of fuel delivery is lost and this can cause catastrophic engine failure. Static injectors, or 100% IDC is normally an indication that the injector is too small for the engine. Injector duty cycle should usually not exceed 80%. Once 80% IDC is reached a bigger injector should be installed.
In some instances low fuel pressure or a failing fuel pump can cause injectors to become static. On the other hand, there are some injectors that will go static if the fuel pressure is too high.
FAQ: What will cause injectors to go bad when not in use?
ERIKC Answer: The internals of injectors are made of various steel alloys that will corrode and or rust when in the presence of moisture. Large parts of America contain enough moisture to cause corrosion/rust damage. Gum, varnish and other normal deposits can be removed by cleaning but once an injector dries out and the deposits hardened inside causing a pintle to get stuck to its seat, that injector will become inoperable and in most cases not possible to clean.
