ERIKC DLLA153P2210 nozzle diesel injetor repair kit FOORJ03510 fuel injetor repair kits FOOR J03 510 for 0445120261

ERIKC DLLA153P2210 nozzle diesel injetor repair kit FOORJ03510 fuel injetor repair kits FOOR J03 510 for 0445120261

Repair Kit description

Repair Kit Picture

Injector Repair Kit list 

ERIKC hot product

Mainly producing and selling CR injectors, nozzles, control valves, valve bonnets, CRIN repair kits, injector adjusting shims, common rail injector testers and repair tools. Besides our own brand "HAOTENG" and "DYD", we are also the sole agent of UK ERIKC (the former OEM factory of famous international brand common rail Parts).
​

Injector FAQ

FAQ: After determining the accuracy of engine injector troubleshooting, remove the injector and verify it on the injector calibration table. Faults generally have the following types?

ERIKC Answer:(1) Injection pressure is too low;

(2) Fuel injection is not atomized, or obvious oil flow is shot down;

(3) The length of oil jets varies from nozzle to nozzle, and oil jets are not uniform;

(4) fuel injector drip oil;

(5) The injector needle stuck and burned.

After the above situation occurs, the injector should be disassembled and repaired. Replace if damaged. After the replacement, the injection pressure should be adjusted to 22+0.5 MPa, and the spray should be in good condition without dripping oil. The main reason for the failure of the fuel injector is oil and filter problems, such as the use of low-quality diesel fuel, long-term use of the filter element is not cleaned, not replaced. It is recommended that users use diesel fuel that meets the national standard. Each time the vehicle is cleaned, the diesel filter element should be cleaned. Second, the diesel filter element should be replaced, and the fuel tank should be cleaned periodically.