|
[China]
Trade Verify
Address: No.201,Unit C,Guangfa Industrial Park, GuangTian Road, Luotian Community, Songgang Town, Bao'an, Shenzhen,Guangdong Province, China
Contact name:Kris Yao
Shenzhen JARCH Electronics Technology Co,.Ltd. |
|
Verified Suppliers
|
|
|
JARCH Robot Reels with Teach Pendant Cable for ABB,Panasonic,KUKA,YASKAWA Robot Arm Retractable Cable Reel
Are you sick of this happening at your shop?
GET A ROBOT REEL
Keep your teach pendant cables organized and off the floor. Extend the life of your teach pendant by eliminating tripping hazards and reducing down time!
JARCH Robot Reels with Teach Pendant Cable for ABB,Panasonic,KUKA,YASKAWA Robot Arm Retractable Cable Reel
Panasonic Type
*** Heavy Duty, Industrial Grade ALL STEEL Construction!
*** Designed for welding, pic n place, paint robots & CNC’s!
*** Quick Disconnect Design
*** Change out a bad cable in 5 minutes!
ABB--Light Type
JARCH Robot Reels with Teach Pendant Cable for ABB,Panasonic,KUKA,YASKAWA Robot Arm Retractable Cable Reel
WHAT THEY CAN DO?
Installation
CAUTION
Be sure reel base is securely grounded to mounting surface. Check
for continuity following installation. On painted surfaces, remove
paint at bolt location, use external tooth lockwashers or run
ground wire from reel base to grounded object. Failure to ground
will prevent reel from performing its intended function and could
result in personal injury.
Mount reel to grounded, metal surface using four holes in mounting
base. To minimize wear on cable and cable guide, reel should be
mounted in direct line with work so that cable is pulled out as
straight as possible during use.
| Packaging Details: | Standard Export carton Package |
| Delivery Details: | Delivery time for Sample: 3 days / Delivery time for Order depends
on quantity Shipping:BY DHL, FedEx, UPS or TNT...... |
Adding wraps of hose will increase spring tension. This can be accomplished by pulling out approximately 10 feet of hose, hand feed hose back up through roller bracket assembly* until loop is large enough to slip over sheave. Add two or three wraps until desired tension is achieved. Do not exceed spring capacity.
This can be accomplished by removing wraps of hose from the reel sheave. Remove wraps of hose from the sheave, one wrap at a time, until desired tension is obtained.
2.How do I install a new drive spring and set pre-turns?
We have several different types of spring driven reels. Each require a slightly different set of instructions. For "How-To" instructions on replacing a drive spring please have your reel model or drive spring number available and consult customer service for instructions.
3.Can my spring driven reel be made "constant tension"?
While most JARCH spring retractable reels can be made "constant tension" at the factory or by simply removing the latching system there are some models that may not have this capability.
Please contact jarch Customer Service to assure that the specific reel you have or require is capable of or available as a "constant tension" model.
4.Reel will not latch
This could mean it has a broken latch spring, bent latch pawl or latch plate. The broken part(s) will need to be replace.
JARCH Robot Reels with Teach Pendant Cable for ABB,Panasonic,KUKA,YASKAWA Robot Arm Retractable Cable Reel
JARCH Robot Reels with Teach Pendant Cable for ABB,Panasonic,KUKA,YASKAWA Robot Arm Retractable Cable Reel
