Shenzhen JARCH Electronics Technology Co,.Ltd. |
Verified Suppliers
|
|
JARCH's spring retractable fuel delivery reels, equipped with Viton seals, incorporate metal forms to insure the greatest possible strength and are ideal for mobile and permanent-mount applications. These rugged, corrosion-resistant reels are suitable for a wide variety of fuel applications including E85. Series F80000 reels are supplied with our ball-bearing style swivel. |
Benefits
***Robust latching mechanism - Latch and ratchet are made of heavy duty cast aluminum with
substantial surface area to limit the opportunity for premature
wear.
***Full flow stress free swivel design - The full flow swivel combines the highest grade seal design and
materials with bearing areas to insure maximum service life.
***Long life drive spring - Declutching arbor virtually eliminates possibility of spring
damage due to reverse winding. Only the highest quality spring
steel is used and conditioned to insure there are no imperfections
offering maximum service life.
***Quality finish and corrosion resistant - Individually powder coated components offer the maximum protection
from premature corrosion.
Installation
CAUTION
Be sure reel base is securely grounded to mounting surface. Check
for continuity following installation. On painted surfaces, remove
paint at bolt location, use external tooth lockwashers or run
ground wire from reel base to grounded object. Failure to ground
will prevent reel from performing its intended function and could
result in personal injury.
Mount reel to grounded, metal surface using four holes in mounting
base. To minimize wear on cable and cable guide, reel should be
mounted in direct line with work so that cable is pulled out as
straight as possible during use. See figures 1 & 2.
Application
Jarch main products:
1. Fiber optic rotary joint series
2. Through bore slip ring series
3. Electro optical slip ring series
4. Hybrid slip ring series
5. Pneumatic rotary joint series
6. Hydraulic rotary union series
7. Capsule slip ring series
8. Pancake slip ring series
9. High current slip ring seriels
10.High speed slip ring series
11.Thermocouple slip ring series
12.Miniature slip ring series
13.Wind turbine slip ring series
14.Ethernet slip ring series
15.Explosion proof slip ring series
16.Mercury slip ring series
Packaging Details: | Standard Export carton Package |
Delivery Details: | Delivery time for Sample: 3 days / Delivery time for Order depends
on quantity Shipping:BY DHL, FedEx, UPS or TNT...... |
Adding wraps of hose will increase spring tension. This can be accomplished by pulling out approximately 10 feet of hose, hand feed hose back up through roller bracket assembly* until loop is large enough to slip over sheave. Add two or three wraps until desired tension is achieved. Do not exceed spring capacity.
This can be accomplished by removing wraps of hose from the reel
sheave. Remove wraps of hose from the sheave, one wrap at a time,
until desired tension is obtained.
2.How do I install a new drive spring and set pre-turns?
We have several different types of spring driven reels. Each
require a slightly different set of instructions. For "How-To"
instructions on replacing a drive spring please have your reel
model or drive spring number available and consult customer service
for instructions.
3.Can my spring driven reel be made "constant tension"?
While most JARCH spring retractable reels can be made "constant
tension" at the factory or by simply removing the latching system
there are some models that may not have this capability.
Please contact jarch Customer Service to assure that the specific
reel you have or require is capable of or available as a "constant
tension" model.
4.Reel will not latch
This could mean it has a broken latch spring, bent latch pawl or
latch plate. The broken part(s) will need to be replace.
If you have any questions, pls contact us without any hesitation.