Shenzhen JARCH Electronics Technology Co,.Ltd. |
Verified Suppliers
|
|
Benefits
***Robust roller guides - High impact UHMW composite roller guides have outstanding wear and corrosion resistance.
***Containerized external drive spring is easily and safely serviced.
***Ductile iron fluid path is strong and reliable.
***Oversized cast aluminum latch and ratchet combined with a stainless steel latch spring offer the longest possible life.
Installation
CAUTION
Be sure reel base is securely grounded to mounting surface. Check
for continuity following installation. On painted surfaces, remove
paint at bolt location, use external tooth lockwashers or run
ground wire from reel base to grounded object. Failure to ground
will prevent reel from performing its intended function and could
result in personal injury.
Mount reel to grounded, metal surface using four holes in mounting
base. To minimize wear on cable and cable guide, reel should be
mounted in direct line with work so that cable is pulled out as
straight as possible during use. See figures 1 & 2.
Application
Jarch main products:
1. Fiber optic rotary joint series
2. Through bore slip ring series
3. Electro optical slip ring series
4. Hybrid slip ring series
5. Pneumatic rotary joint series
6. Hydraulic rotary union series
7. Capsule slip ring series
8. Pancake slip ring series
9. High current slip ring seriels
10.High speed slip ring series
11.Thermocouple slip ring series
12.Miniature slip ring series
13.Wind turbine slip ring series
14.Ethernet slip ring series
15.Explosion proof slip ring series
16.Mercury slip ring series
Packaging Details: | Standard Export carton Package |
Delivery Details: | Delivery time for Sample: 3 days / Delivery time for Order depends
on quantity Shipping:BY DHL, FedEx, UPS or TNT...... |
A:
If you want to costomize the special slip ring model, you need provide details as below:
a. Operatring speed(RPM)
b. The type of installation
c. Outline size
d. Channels(the No. of single wire besides cable)
e. Rated voltage & current for power rings and signal rings
f. The signal type and related parameters(very important)
g. Operating temperature h.IP(sealing requirements)
2.How long is your production lead time?
A: It needs 7 to 15 days for standard products, 10 to 20 days for
simple customized products,
15 to 40 days for complex customized porducts.
Adding wraps of hose will increase spring tension. This can be accomplished by pulling out approximately 10 feet of hose, hand feed hose back up through roller bracket assembly* until loop is large enough to slip over sheave. Add two or three wraps until desired tension is achieved. Do not exceed spring capacity.
This can be accomplished by removing wraps of hose from the reel sheave. Remove wraps of hose from the sheave, one wrap at a time, until desired tension is obtained.
*For Series D9000 reels, you will have to remove the bumper and control handle then feed end of hose through roller bracket assembly to add or remove wraps of hose from the reel drum.
If you have any questions, pls contact us without any hesitation.