AD7714ARZ-5 24 Bit Integrated Circuit IC Chip 1 Sigma Delta 24-SOIC

AD7714ARZ-5 24 Bit Analog to Digital Converter 3, 5 Input 1 Sigma-Delta 24-SOIC

FEATURES

Charge Balancing ADC 24 Bits No Missing Codes 0.0015% Nonlinearity Five-Channel Programmable Gain Front End Gains from 1 to 128 Can Be Configured as Three Fully Differential Inputs or Five Pseudo-Differential Inputs Three-Wire Serial Interface SPI™, QSPI™, MICROWIRE™ and DSP Compatible 3 V (AD7714-3) or 5 V (AD7714-5) Operation Low Noise (<150 nV rms) Low Current (350␣ mA typ) with Power-Down (5 mA typ) AD7714Y Grade: +2.7 V to 3.3 V or +4.75 V to +5.25 V Operation 0.0010% Linearity Error –408C to +1058C Temperature Range Schmitt Trigger on SCLK and DIN Low Current (226␣ mA typ) with Power-Down (4 mA typ) Lower Power Dissipation than Standard AD7714 Available in 24-Lead TSSOP Package Low-Pass Filter with Programmable Filter Cutoffs Ability to Read/Write Calibration Coefficients

APPLICATIONS

Portable Industrial Instruments Portable Weigh Scales Loop-Powered Systems Pressure Transducers

GENERAL DESCRIPTION 

The AD7714 is a complete analog front end for low-frequency measurement applications. The device accepts low level signals directly from a transducer and outputs a serial digital word. It employs a sigma-delta conversion technique to realize up to 24 bits of no missing codes performance. The input signal is applied to a proprietary programmable gain front end based around an analog modulator. The modulator output is processed by an onchip digital filter. The first notch of this digital filter can be programmed via the on-chip control register allowing adjustment of the filter cutoff and settling time. The part features three differential analog inputs (which can also be configured as five pseudo-differential analog inputs) as well as a differential reference input. It operates from a single supply (+3␣ V or +5␣ V). The AD7714 thus performs all signal conditioning and conversion for a system consisting of up to five channels. The AD7714 is ideal for use in smart, microcontroller- or DSPbased systems. It features a serial interface that can be configured for three-wire operation. Gain settings, signal polarity and channel selection can be configured in software using the serial port. The AD7714 provides self-calibration, system calibration and background calibration options and also allows the user to read and write the on-chip calibration registers. CMOS construction ensures very low power dissipation, and the power-down mode reduces the standby power consumption to 15␣ µW typ. The part is available in a 24-pin, 0.3 inch-wide, plastic dual-in-line package (DIP); a 24-lead small outline (SOIC) package, a 28-lead shrink small outline package (SSOP) and a 24-lead thin shrink small outline package (TSSOP).

Manufacturer	Analog Devices Inc.
Series	-
Packaging	Tube
Part Status	Active
Number of Bits	24
Sampling Rate (Per Second)	1k
Number of Inputs	3, 5
Input Type	Differential, Pseudo-Differential
Data Interface	SPI, DSP
Configuration	MUX-PGA-ADC
Ratio - S/H:ADC	-
Number of A/D Converters	1
Architecture	Sigma-Delta
Reference Type	External
Voltage - Supply, Analog	5V
Voltage - Supply, Digital	3 V ~ 5.25 V
Features	PGA
Operating Temperature	-40°C ~ 85°C
Package / Case	24-SOIC (0.295", 7.50mm Width)
Supplier Device Package	24-SOIC
Base Part Number	AD7714