|
[China]
Trade Verify
Address: Room 216-1589, Textile Raw Materials Market, Zhangjiagang Free Trade Zone, Suzhou, China
Contact name:Chen
Jiangsu Sat-Cham Energy Technology Co., Ltd. |
|
Verified Suppliers
|
|
|
Carbon Steel Superheater And Reheater For CFB Boilers In Power
Plant
What is a reheater?
: a receiver furnished with means for heating the steam in a
compound engine or turbine. : an apparatus for reheating compressed
air before use to prevent excessively low temperatures due to
expansion.
Details:
| 1 | Material composition | Carbon steel, alloy steel or heat-resistant steel, collection boxes and other supporting material. Tubes are customized types of specifications. |
| 2 | Design pattern | Vertical or horizontal layout. |
| 3 | Advantages | Beautiful appearance, size, accuracy, first-class bending and welding technology, first-class detection equipment. |
Product Introduction:
Functions and characteristics of superheaters and reheaters
functions of superheaters and reheaters:
Superheaters and reheaters are important parts for the heating
surfaces, used to increase steam temperature, aiming to improve
steam enthalpy and further to increase the thermal circulation
efficiency for power station.
Superheaters work to heat surnatured steam to superheated steam
with a certain tempetature. When boiler loads or other working
conditions change, it is necessary to make sure superheated steam
temperature to be normal, and within allowable range of temperature
variation.
From the thermal circulation in power station, the original
parameters of pressure and temperature is higher, the thermal
efficiency of circulation is better, or the steam humidity of the
steam turbine rear is too high, influencing its safety. While the
superheaer steam temperature is limited by metal materials, at
present, due to limitation of metal materials, superheated
temperature for most power station boilers are still within the
range of 540-555 dgrees, and to avoid the steam humidity of blade
of steam turbine rear too big, thus middle reheating system is
applied.
Functions of reheaters are to heat exhaust of steam turbine high
pressure cylinder to the reheated temperature which is close or
equal to superheated temperature, and then send them to middle
pressure cylinder and low pressure to expand and work to increase
the dryness of blace of steam turbine rear. Usually, the pressure
of reheated steam is one fifth of that of superheated steam.
Application of reheating system can increase the thermal efficiency
for power stations by 4-5%.
So far in our country, units with capacity over 125mw all apply one
time middle reheating system. Double reheating can increase again
the thermal efficiency of circulation by 2%, but the system is very
complicated, it is not applied for national units, but it is common
for large boilers overseas.
Application:
air cooler, fired heater, heat exchanger, marine boiler,
economizer, power plant boiler, HRSG boiler, waste heat recovery
unit, air heater etc
Characteristic:1.Anti-corrosion2.Anti-wear3.Lower contact
resistance 4.Higher Stability
Our products can be modified according to our customers' needs and
the situation.we design and manufacture safe,reliable and efficient
H-fin tubes.it has also completed stand-alone product quality
assurance systems.Production of H-fin tubes are with high heat
transfer efficiency, they have flue gas resistance and are designed
for a small space.
| Technical parameters | The high degree of fin 0-16mm(or outside diameter of fin φ25-φ75); Pitch of fins 2.0-5.0mm; Length of finning tube 0.5~ 14m. |
| Single metal rolling finning tube | Pure aluminum 1060 or aluminum alloy 6063,6061. Outside diameter Shall be less than 40mm |
| Double metal rolling finning tube | Tube-based protection from the outer layer of aluminum tubes,corrosion-resistant,Tube-based can be made of carbon steel pipe,in addition to,stainless steel tube and copper tube can also be used, as well as titanium alloy tube |
| Package | The aluminum finned tubes are well packed in plastic film in the
inner and steel fram in the outer |
Q1: How long is the warranty period?
We provide 18 months warranty for all spare parts(exclude fragile
parts).
Q2: How can we guarantee quality?
1 All machines are in strict accordance with the ISO quality and CE
system requirements.
2 Each procedure is crafted by professional Skilled labour,
followed by particular QC
3 All information of our products can be checked in efficient
management system.
Q3: What can you buy from us?
Boiler Economizer, Boiler Fin tube, Boiler Air preheater, Boiler
superheater, Boiler membrane wall,
Boiler manifold headers and other pressure spare parts.
Q4: What kind of service do you provide?
Before sales:
Provide productinformations, market research forecasting, product
customization,product processing,consultation and other services
for your convenience.
Q5: Are you a factory or trading company, where are you located?
We are a factory, just 130km(2 hours by car) away from Shanghai
Airport.
We offer pickup service at Shanghai for your visit.
