Home Companies Zhangjiagang HuaDong Boiler Co., Ltd.

Advanced High Efficient Horizontal Cyclone Separator Customized For Industry

Zhangjiagang HuaDong Boiler Co., Ltd.

Contact Us

[China] country

Trade Verify

Address: Address: N0.1, Dongli Road, Donglai, Zhangjiagang City, Jiangsu Province, China

Contact name:Sandy Chen

Inquir Now

Zhangjiagang HuaDong Boiler Co., Ltd.

Verified Suppliers
  • Trust
    Seal
  • Verified
    Supplier
  • Credit
    Check
  • Capability
    Assessment

Advanced High Efficient Horizontal Cyclone Separator Customized For Industry

Country/Region china
City & Province jiangsu
InquireNow

Product Details

 

Advanced High Efficient Customized Industrial Cyclone Separator for Industry

What is industrial cyclone separator?

 

Cyclone separator is a device used for separating gas-solid system or liquid-solid system.
The working principle is that the solid particles or droplets with large inertia centrifugal force are separated from the outer wall surface by the rotation motion caused by tangential introduction of air flow.
The main characteristic of cyclone separator is simple in structure and large elasticity of operation, high efficiency, convenient management and maintenance, low cost, is used to capture dust above 5 ~ 10 microns in diameter, are widely used in the pharmaceutical industry, especially suitable for dust particles coarser, dust concentration is larger, high temperature and high pressure conditions, also often used as a fluidized bed reactor of separation device, or used as pre separator, is a kind of industry application is very wide separation equipment.

 

What are the features of industrial cyclone separator?

  1. The pressures and temperatures that headers have to withstand depend on the component to which they are connected. A header connected to an economizer or to water wall panels is subject to less severe requirements on the material than a header connected to superheaters or reheaters.
  2. Depending on the temperature and pressure of headers, Vallourec supplies tubes in carbon steel to high-alloy ferritic steels such as T/P91 or T/P92, with sizes ranging from 88.9 mm to 406.4 mm.

What are the functions of industrial cyclone separator?

 

1.Enhance Heat Transfer
The air after the heat exchanger enters the furnace, which accelerates the drying, ignition and combustion process of the fuel, ensures the stable combustion in the boiler and improves the combustion efficiency.


2. Improve and intensify combustion
Because the combustion in the furnace has been improved and strengthened, and the temperature of hot air entering the furnace has been increased, the average temperature level in the furnace has also been raised, so the radiation heat transfer in the furnace can be strengthened.


3. Hot air can be used as fuel desiccant.
Because of the stable combustion in the furnace and the enhanced radiation heat exchange, the chemical incomplete combustion loss can be reduced. On the other hand, the air preheater uses the waste heat of flue gas to further reduce the loss of exhaust gas, thus improving the thermal efficiency of the boiler. According to experience, when the air in the preheater rises by 1.5 C, the exhaust gas temperature can be reduced by 1 C. After installing the air preheater in the boiler flue, if the air waste heat can be 150-160 C, the exhaust gas temperature can be reduced by 110-120 C, and the thermal efficiency of the boiler can be increased by 7%-7.5%. Fuel can be saved by 11%-12%.


4. Reducing the loss in the furnace, lowering the exhaust gas temperature and improving the thermal efficiency of the boiler.
Hot air is an important desiccant and pulverized coal conveying medium for grease powder system in power plant boilers.

 

What are the parameters of industrial cyclone separator?

 

MaterialCarbon steel,Alloy steel,Stainless steel.
LengthAccording to costumes requirements.
Temperature Range300℃~1500℃
Diameter(OD)76mm~914mm

 

What is the working principle of industrial cyclone separator?

 

Cyclone separator is a kind of dry gas-solid separation equipment which can separate dust from air stream by using centrifugal force generated by gas-solid mixture when rotating at high speed.
The separation efficiency is higher because the centrifugal force is much higher than the gravity and inertia force.

 

About us

 

The products of our company have been widely used in major power plants of various provinces and cities in China, bringing stable and significant economic and social benefits to cooperated power plants. At the same time, we attach great importance to product development and strive to improve product quality. Through the cooperation with a number of domestic and foreign companies, we constantly explore the international market.The products of our company have been widely used in major power plants of various provinces and cities in China, bringing stable and significant economic and social benefits to cooperated power plants. At the same time, we attach great importance to product development and strive to improve product quality. Through the cooperation with a number of domestic and foreign companies, we constantly explore the international market.

 

Hot Products

Steam Boiler Parts Boiler Economizer Heat Exchange Finned Tube ASME Standard Product Introduce HDB ...
Vertical Carbon Steel Pressure Vessel Economiser In Boiler For Power Station Use Product Description ...
Steel Boiler Economizer With High Thermal Efficiency For Power Station And Industry Summary of ...
Steel Boiler Economizer With High Thermal Efficiency For Power Station And Industry Summary of ...
Steel Boiler Economizer With High Thermal Efficiency For Power Station And Industry Summary There ...
Steel Boiler Economizer With High Thermal Efficiency For Power Station And Industry Summary There ...