The ATL -9000 fire alarm control panel (linkage type) (fire alarm
control panel) is a new generation product launched by ATL, In
order to adapt to the needs of engineering design, the fire alarm
control panel is designed with a linkage control function that
enables it to be flexibly used with other related products from ATL
to form a fire alarm and linkage integrated control system. It is
particularly suitable for applications in large and medium-sized
fire alarm and linkage integrated control systems. The fire alarm
and linkage control system is extensively applied in high-grade
office buildings, big residence communities, department stores,
gymnasiums, exhibition halls, libraries, factory buildings,
supermarkets, hotels and other large and medium-sized fire
1. It adopts new generation high-speed microprocessor technology
that has a data processing speed and a data storage capacity 100
times and 1000 times higher than that of conventional technology
2. It has a 7.4″16-grey-scale LCD Chinese-supporting display and
with a display resolution of 640×480.
3. Its operating interfaces simulate the menus and interfaces of
Windows and therefore ensure operation habits similar to that of
computers and is easy to learn.
5. It uses a flexibly and conveniently controllable standard PS/2
computer keyboard and mouse as on-site programming devices.
6. It provides a Chinese Pinyin input method and a Chinese
section-position code input methodand can therefore realize Chinese
input freely and easily.
7. It can copy or restore both setting files and historical files
through a CF intelligent storage card (optional), making system
8. It adopts a non-polarity two-bus intelligent alarm linkage mode
and has a total of 324 intelligent detectors or modules for a
single circuit. The addresses of the intelligent detectors or
modules may be hashed with No.1 to No.324.
9. It is equipped with multiple high-speed CAN-bus interfaces,
ensuring quick and reliable data transmission.
10.It has super high single-machine capacity (maximum
single-machine capacity: 40×2×324=25,920 alarm points).
11.It supports the networking of 20 ATL-9000 fire alarm control
panels. It has a maximum capacity of 518,400 alarm points
(20×25,920) after networking.
12.It can be connected with a multi-line linkage control unit and
has a maximum capacity of 4,000 points for a standalone linkage
13.It can store the historical information of system operation,
including 1,000 pieces of historical fire alarm information,
historical request information, historical feedback
information,historical fault information and historical operation
information respectively. Users can customize the equipment type,
making system integration convenient.
14.It introduces the concept of a virtual interface board to
realize the linkage operations of general semantics, thus realizing
the most complicated system linkage relations easily.
15.It has manual single-point start and stop functions for modules,
making on-site debugging and tests convenient.
16.It has a single-point test function for detectors or modules,
making the operating conditions and test data of detectors
17.It has a standard special mini printer, enabling it to print
various operating conditions in a real-time way.
18.It can be accessed to a zone display panel, a building display
panel or a floor display panel to send the information displayed on
it to locations like corridors.
19.It can be connected with the ATL-982 graphical display device
(optional, ATL-982 for short) in the fire control room to display
the specific locations of fires and faults intuitively.
20.It executes administration by different levels for users of
multiple levels and grants the users at different levels the
corresponding system operation authorities, making system
21.It can realize local or remote software upgrades, thus enabling
it to operate stably and reliably.
22.Executive standards: Fire Alarm Control Units (GB4717-2005),
Automatic Control System for Fire Protection (GB16806-2006)
Main power supply: AC 220V±20%/50Hz or DC24V
Emergency power supply: Maintenance-free DC24V battery (its
capacity depends on the system size).
Ambient temperature: -10℃～+55℃ during system operation
Ambient humidity: ≤95% (40℃±2℃, without condensation)
3 Peripheral equipment:
For the specific technical parameters of equipment like detectors,
modules and audible and visual alarms, see the corresponding