Jiangsu Faygo Union Machinery Co., Ltd. |
|
EBM LHB70 - MACHINE INTRODUCTIONS
MODEL: Continuous Extrusion Blow Molding Machine LHB70(Single station)
TARGET PRODUCT: Jerry Can,Toy ball,Toy car wheel,etc.
MAX PRODUCT VOLUME: 12 Liters
PLASTIC MATERIAL: HDPE, PP,
DELIVERY TIME: 45 Days
GUARANTEE TIME: One Year After Delivery
Machine Model | EBM HT-12L (Single station) | ||
Max Product Volume | 12L | ||
Suitable Material | PE,PP | ||
Machine Size | 3.8*1.8*2.8 m | ||
Machine Weight | 5 Tons | ||
Voltage Suitable | Customer Specified | ||
Screw Diameter | 70 mm | ||
L/D Ratio | 24:1 | ||
Extruder Heating Power | 14.2 KW | ||
Number of Extruder Heating Zone | 3 zone | ||
Extrusion Motor Power | 22 KW | ||
Plasticizing Capacity | 80 Kg/Hour | ||
Clamping Force | 95 KN | ||
Platen Size | 450*575 mm | ||
Platen Opeing Stroke | 200-600 mm | ||
Max Mould Size | 450*550 mm | ||
Type of Die Head | Continuous | ||
Head heating Power | 5.7 KW | ||
Number of Head Heating Zone | 3 Zone | ||
Max Die-pin Diameter | 180 mm | ||
Total Power | 45 KW | ||
Average Energy Consumption | 31 KW | ||
Air Pressure | 0.7 Mpa | ||
Air Consumption | 0.9 m3/min | ||
Cooling Water Needed | 60 L/min | ||
Loading Reference | 20'GP |
CONTINUOUS DIE HEAD SYSTEM
Central-incoming die head with special steel: the continuous
extrusion head is designed with material center in-coming type and
removing the plastic melting line on the product surface, easily
for material or color change, saving the time & material cost
with speedy operation. According to the customer's needs,there are
various kind of heads can been fixed on the machine like Single die
head, Twin die head, Tri-die head, Tetra-die head, etc.
Gradient mixing type with high-speed energy saving design, gradually changed screw with same distance and different deep. Material of screw: High quality nitriding steel 38CrMoAlA,with nitriding surface HV≥800,brittleness≤2. Material of barrel: High quality nitriding steel 38CrMoAlA,with nitriding surface HV≥900,brittleness≤2. It include: extrusion motor, gearbox, screw and barrel covered with heater bands, cooling fans, hopper.
Japan hydraulic valve+impoted sealing parts+proportional control:The main hydraulic system is mainly composed of motor, pump, pressure regulating valve block, reversing valve blocks, cylinders and oil chillers. It controls platens open & close, carriage up & down, extrusion system up & down, blow pin actions, or even spinning cut and so on.
Japan imported PLC+ automatic temperature control module+other imported electronic parts:The electrical control system is composed of operation panel, temperature control module, PLC, input & output module, proportion board, contactors, voltage stabilized source, air switches, mid relays, proximity switches, inverter and motors. The operation panel contains power switch, touch screen, alarm, hot cutter knob, auto cycle button, emergency stop button, action reversion button, extruding speed button.
Clamping unit is composed of front & back platens, clamping unit, mould clamping hydraulic cylinders, synchronizing mechanism, with the structure of nether crank design. Platen movements open & close is assisted with linear guide rails & ball bearing sliders to increase action smoothness and position precision. The end positions & slow speed positions are controlled by travelling electric transducer.
The pneumatic system contains air cylinder, air valves, air filters, air tubes, fast plugs and so on, for controlling the actions of head inner blowing, blow pin blowing, auto-deflashing, or pushing in & out for some special moulds. The necessary air pressure is 0.8~1.0 Mpa, air consumption is 0.8~1.0 M3/min. The water system contains water distributing blocks, ball valves, tubes, connectors and so on, for chilling the screw & barrel, hard gear box, blowing units and moulds. The necessary water pressure is 0.2~0.4 Mpa, water consumption is 0.5 m3/hour.
This kind machine fixed accumulator tank energy saving system,lower power consumption,make the machine working more stable.Check the attached photo.