Active Member
|
[China]
Address: NO.8 KOREA INDUSTRY ZONE, PHONEIX TOWN, ZHANG JIAGANG CITY, JIANGSU PROVINCE, CHINA
Contact name:Figo Hussian
Jiangsu Faygo Union Machinery Co., Ltd. |
|
|
two layers three layers plastic 2000L 1000L IBC tank extrusion blow molding machine
Automatic Production
our machine supports auto-deflashing control system and pneumatic
hardware, the scraps can be on-line removed automatically through
auto-deflashing mould. Scraps fall down and slide outside of
machine through a slide channel. The finished products are pushed
out from another side together with platen carriage down action
with the guidance of bottle collective shelves. The conveyer system
can be equipped to take scraps into crusher, and convey the
finished products to leakage tester or packing table. During the
producing period, the machine can work automatically without the
worker's help.
Working Flow Arrangement
The whole producing line totally need 2 workers. Worker No.1 takes
charge of material mixing and feeding, he collects the crushed
scraps into color mixer, operate the material mixing of new
material, crushed material and color master batch. After mixing he
carries material into material source tank, the auto-loader will
feed material automatically. The other worker takes charge of
bottle packing, and take the packaged bottles into storage area.
Extrusion blow molding machine technical specification:
| Model | TDB-2000L | |
| Station | Single station | |
| Max. Product Volume | (L) | 2000L |
| Dry cycle | (pc/h) | 30 |
| Screw Diameter | (mm) | 120*2 |
| Screw L/D ratio | (L/D) | 32 |
| Screw drive power | (KW) | 132*2 |
| Screw heating capacity | (KW) | 23.6*2 |
| No. of heating zone | (ZONE) | 6*2 |
| Max.Output of HDPE | (Kg/hr) | 350*2 |
| Oil pump drive power | (KW) | 11+15=26 |
| Clamping force | (KN) | 3000 |
| Mold stroke (Platen distance) | (mm) | 400~2000 |
| Max. Size of Mold(W*H) | (mm) | 1600*2000 |
| Capacity of the diehead | (L) | 100 |
| Max. Die diameter | (mm) | 1500*120 |
| Die heat capacity | (KW) | 95 |
| No. of heating zone | (ZONE) | 30 |
| Blowing pressure | (Mpa) | 1.0 |
| Air volume | (M3/MIN) | 5 |
| Cooling water pressure | (Mpa) | 0.4 |
| Water consumption | (L/MIN) | 350 |
| Size of machine ( L*W*H) | (m) | 11.5*9*7.2 |
| Weight of machine | (TON) | 70-75 |
Extruson blow molding machine suppliers of main parts:
a) Hydraulic Parts
| Name | Supplier |
| Oil Pump | PARKER or SUNNY, America |
| Valve | YUKEN or SUNNY |
| Hose, Joint | PARKER SIR |
| Sealer | Top DZ Europe |
b) Electrical Parts
| Name | Supplier |
| Microcomputer Control System | MITSUBISHI PLC, Japan |
| Touch Screen | HITECH color screen, Taiwan |
| Temperature Controller | MITSUBISHI, Japan |
| Conductor | SCHNEIDER |
| Air Switch | SCHNEIDER |
| Motor | SIMENS BEIDE Asynchronous Motor |
| Power Resource | MEAN WELL, Taiwan |
| Inverter | MITSUBISHI |
c) Pneumatic Parts
| Name | Supplier |
| Solenoid Valve | FESTO, Germany |
| Cylinder | FESTO, Germany |
Extrusion blow molding machine technical feature:
The electronic control system: Japan's Mitsubishi PLC computer and human-machine interface (English or Chinese) control, color touch-screen operation. All the process set to change, retrieval, monitoring, troubleshooting and other functions are implemented on the touch screen, no point of contact with the working principle, components and durable.
The hydraulic system: proportional pressure control, with imported brands Yuken hydraulic components, stable and reliable.
The plasticizing system: efficient plastics mixing screw, to ensure plasticizing full uniform.
The speed control system: VVVF + alloy steel and hard gear reducer, speed stable, low noise, durable.
The opening and closing mold, mold transfer system: beam arm, three position, center locking clamping mechanism, to ensure long-term use. Clamping force balance, no deformation, the use of body translation mode (ball linear guide), high precision, low resistance, fast.
Blowing the needle holder: blow the whole Square-type needle holder, a solid does not shift to ensure a smooth incision products.
Extrusion blow molding machine installation, commissioning and training:
If the buyer needs seller to send technicians to workshop for supervising the erection and start-up, seller must support and send sufficient number of technicians and keep duration of stay in workshop. Usually it's about 3~5 days in this duration. The first day is that when our technician is at the airport to factory of buyer. And from the first day, the buyer has to pay US$80 per day. And all accommodation, visa application & air ticket will be born by the buyer.
