Small plastic PP PE yogurt bottles milk bottles Blow Moulding
Machines HTSII-3L
Extrusion blow molding machine technical feature:
The electronic control system: Japan's Mitsubishi PLC computer and human-machine interface
(English or Chinese) control, color touch-screen operation. All the
process set to change, retrieval, monitoring, troubleshooting and
other functions are implemented on the touch screen, no point of
contact with the working principle, components and durable.
The hydraulic system: proportional pressure control, with imported brands Yuken
hydraulic components, stable and reliable.
The plasticizing system: efficient plastics mixing screw, to ensure plasticizing full
uniform.
The speed control system: VVVF + alloy steel and hard gear reducer, speed stable, low
noise, durable.
The opening and closing mold, mold transfer system: beam arm, three position, center locking clamping mechanism, to
ensure long-term use. Clamping force balance, no deformation, the
use of body translation mode (ball linear guide), high precision,
low resistance, fast.
Blowing the needle holder: blow the whole Square-type needle holder, a solid does not shift
to ensure a smooth incision products.
Extrusion blow molding machine technical specification:
Model | | HTSII-3L |
Max. Product Volume | (L) | 0.35L |
Dry cycle | (pc/h) | 800*2 |
Screw Diameter | (mm) | 70/80 |
Screw L/D ratio | (L/D) | 25 |
Screw drive power | (KW) | 22/30 |
Screw heating capacity | (KW) | 4.2/8 |
No. of heating zone | (ZONE) | 3/4 |
Max. Output of HDPE | (Kg/hr) | 70/110 |
Oil pump drive power | (KW) | 11 |
Clamping force | (KN) | 80 |
Platen distance | (mm) | 160~320 |
Mold moving stroke | (mm) | 500 |
Max. Size of Mold(W*H) | (mm) | 450*250 |
Max. Die diameter | (mm) | 30/45 |
Die heat capacity | (KW) | 4.3 |
No. of heating zone | (ZONE) | 13 |
Central distance of Quad head | (mm) | 70/100 |
Blowing pressure | (Mpa) | 0.6 |
Air volume | (M3/MIN) | 0.4 |
Cooling water pressure | (Mpa) | 0.2~0.3 |
Water consumption | (L/MIN) | 80 |
Size of machine ( L*W*H) | (m) | 3.2*2.7*2.5 |
Weight of machine | (TON) | 8 |
Extruson blow molding machine suppliers of main parts:
a) Hydraulic Parts
Name | Supplier |
Oil Pump | PARKER or SUNNY, America |
Valve | YUKEN or SUNNY |
Hose, Joint | PARKER SIR |
Sealer | Top DZ Europe |
b) Electrical Parts
Name | Supplier |
Microcomputer Control System | MITSUBISHI PLC, Japan |
Touch Screen | HITECH color screen, Taiwan |
Temperature Controller | MITSUBISHI, Japan |
Conductor | SCHNEIDER |
Air Switch | SCHNEIDER |
Motor | SIMENS BEIDE Asynchronous Motor |
Power Resource | MEAN WELL, Taiwan |
Inverter | MITSUBISHI |
c) Pneumatic Parts
Name | Supplier |
Solenoid Valve | FESTO, Germany |
Cylinder | FESTO, Germany |
Extruson blow molding machine suppliers of main parts:
a) Hydraulic Parts
Name | Supplier |
Oil Pump | PARKER or SUNNY, America |
Valve | YUKEN or SUNNY |
Hose, Joint | PARKER SIR |
Sealer | Top DZ Europe |
b) Electrical Parts
Name | Supplier |
Microcomputer Control System | MITSUBISHI PLC, Japan |
Touch Screen | HITECH color screen, Taiwan |
Temperature Controller | MITSUBISHI, Japan |
Conductor | SCHNEIDER |
Air Switch | SCHNEIDER |
Motor | SIMENS BEIDE Asynchronous Motor |
Power Resource | MEAN WELL, Taiwan |
Inverter | MITSUBISHI |
c) Pneumatic Parts
Name | Supplier |
Solenoid Valve | FESTO, Germany |
Cylinder | FESTO, Germany |
Extrusion blow molding machine installation, commissioning and
training:
If the buyer needs seller to send technicians to workshop for
supervising the erection and start-up, seller must support and send
sufficient number of technicians and keep duration of stay in
workshop. Usually it’s about 3~5 days in this duration. The first
day is that when our technician is at the airport to factory of
buyer. And from the first day, the buyer has to pay US$80 per day.
And all accommodation, visa application & air ticket will be
born by the buyer.