| Cat.No | Material | Size | Volume | Cap Color | Packing |
| JZ0B1375 | Glass/PET | 13*75mm | 2-4ml | Light Blue | 100pcs/tray, 1200/1800pcs per carton
1million pcs a 20FT container
2million pcs a 40FT container
2.6milion pcs a 40HQ container |
| JZ0B13100 | Glass/PET | 13*100mm | 5-7ml | Light Blue |
| JZ0B1316 | Glass/PET | 16*100mm | 8-10ml | Light Blue |
INSTRCUTION FOR USE
1. Check the tube first;
2. Insert the blood collection needle into the vein after the skin
disinfection;
3. Put the puncture needle into rubber stopper and the blood will
automatically flow into the tube;
4. After the blood is collected to the calibration capacity, first
pull out the IV needle on body, then pull off the tube.
5. Gently reverse the tube 5-8 times after collection(except no
additive plain tube).
notice
1. The needle should vertically piercing in the middle of rubber
stopper;
2. Don't moving the rubber stopper;
3. Single use only. Discard after use;
4. It is prohibited to use the tube which are contaminated or have
impurities in it;
5. In order to prevent blood spatter or avoid blood infection the
operators should weargloves and other protective devices;
STORAGE
Store tubes at 4–25°C (40–77°F). NOTE: Avoid exposure to direct
sunlight.
Exceeding the maximum recommended storage temperature may lead to
impairment of the tube quality (i.e. vacuum loss, drying out of
liquid additives, colouring, etc.)
