Venous Blood Collection Tubes Manufacturer With CE ISO13485
0.5-10ml Glass Pet Tube
Blood collection tubes are designed with specific properties to
ensure the accuracy and reliability of laboratory test results.
Some of the key properties of blood collection tubes include:
1. Additives: Blood collection tubes may contain various additives,
such as anticoagulants or clot activators, to prevent clotting,
preserve the sample, or enhance the performance of certain
laboratory tests.
2. Color-coded stoppers: Blood collection tubes are often
color-coded to indicate the type of additive or anticoagulant
present in the tube. This helps to prevent errors and ensure that
the correct tube is used for each test.
3. Sterility: Blood collection tubes must be sterile to prevent
contamination of the sample and ensure accurate test results.
4. Vacuum seal: Blood collection tubes are typically designed with
a vacuum seal to help draw the blood into the tube and ensure that
the correct volume of blood is collected.
5. Material: Blood collection tubes are made from materials that
are compatible with the sample being collected and the laboratory
test being performed. For example, some tests require glass tubes,
while others require plastic tubes.
6. Labeling: Blood collection tubes must be properly labeled with
the patient's name, date and time of collection, and other relevant
information to ensure traceability and prevent errors.
Specification
- Color Code: Red/Purple/Yellow/Blue/Black/Green/Gray
- Volume: 1-10ml
- Sizes: 13*75mm, 13*100mm, 16*100mm
- Material: Glass, PET(Plastic), PP
- Expiration: 2 years for glass tube, 1 year for PET tube
- Centrifuge: No centrifugation performed
- Inversion: 8 -10 times
- Clotting Time: Blood will not freeze
| Material | Size | Volume | Cap Color | Packing |
| PP | 8*45mm | 0.5-1ml | Red/Purple/Yellow/Blue /Black/Green/Gray | 100pcs/tray, 1200/1800/3000pcs per carton
1million pcs a 20FT container
2million pcs a 40FT container
2.6milion pcs a 40HQ container |
| Glass/PET | 13*75mm | 2-4ml |
| Glass/PET | 13*100mm | 5-7ml |
| Glass/PET | 16*100mm | 8-10ml |
PROCEDURES FOR USE
To use a blood collection tube, the healthcare provider typically
follows these steps:
1. Clean the site where the blood will be drawn with an antiseptic
solution.
2. Apply a tourniquet to the patient's arm to help locate a vein.
3. Insert the needle into the vein and allow the blood to flow into
the tube until it is filled to the appropriate level.
4. Gently invert the tube several times to mix the blood with any
additives in the tube.
5. Label the tube with the patient's name, date and time of
collection, and any other relevant information.
6. Transport the tube to the laboratory for analysis, following any
specific handling and transport instructions for the type of tube
and laboratory test being performed.
Samples Preservation
1. Specimens should ideally be sent to the laboratory as soon as
possible (via the next transport on the day of sample collection).
2. If samples cannot be sent to the laboratory on the day of
collection (e.g. venepuncture performed after the last van
pick-up):
• Biochemistry samples (lithium heparin and serum) should ideally
be centrifuged and stored refrigerated (4-8°C)
• Biochemistry samples (fluoride oxalate) should not be
centrifuged; these should be stored refrigerated (4-8°C)
• Haematology samples (EDTA and citrate) should not be centrifuged;
these should be stored refrigerated (4-8°C)
• Urine samples (random ‘spot’ and 24-hour samples) should be
stored refrigerated (4-8°C)
• If centrifugation facilities for Biochemistry samples do not
exist within the surgery, Biochemistry blood samples may be stored
refrigerated (4-8°C), but please be aware that the integrity of
these samples will be compromised, resulting in spurious results,
particularly (but not limited to) plasma sodium, potassium,
phosphate, LDH.
FAQ
1. Are you factory or trading company?
We are a factory established in 2005 under the name of
Jiangxi Exquisite(JINGZ) Technology Co.Ltd in Jiangxi Xiaolan
Industrial Park, with full production line and medical approval
certificates. YBK Medical is the subsidary company of JINGZ to
supply better sales and service to customers.
2. How can I contact your company?
Email us at sales@ybkmed.cn or Whatsapp:
008615084880052. Welcome to visit our factory at Nanchang too.
3. Can I have a sample order?
Yes, free samples with freight collect.
4. Do you have an MOQ for blood tube and needle?
Yes, MOQ 12000pcs(10 cartons) for each size.
5. Is it ok to print our logo on label and packing carton?
Yes, we offer OEM/ODM service for our products.
