Home Companies Shanghai Juyi Electronic Technology Development Co., Ltd

12-36V DC BLDC Motor Driver Motor Controller for 3 - Phase Sensorless DC Motor -20 - 85℃

Contact Us

[China]

Trade Verify

Address: No. 1, lane 1199, yunping road, jiading district, Shanghai,China

Contact name:Lisa

Shanghai Juyi Electronic Technology Development Co., Ltd

Verified Suppliers
  • Trust
    Seal
  • Verified
    Supplier
  • Credit
    Check
  • Capability
    Assessment

12-36V DC BLDC Motor Driver Motor Controller for 3 - Phase Sensorless DC Motor -20 - 85℃

Country/Region china
City & Province shanghai shanghai
Categories General Mechanical Components Agents

Product Details

JYQD-V8.3B brushless DC motor driver board for sensorless DC motor
 
(For Brushless Sensorless DC motor )
 Model numberJYQD-V8.3B
Operating temp.-20—85℃
Operating voltage12V-36V
Max current8A
Cont.working current88A
· PWM speed controlPWM frequency:1-20KHZ; Duty cycle 0-100%
Analog voltage speed regulation0-5V
O.V / L.V protectionYES
Speed pulse signal outputYES 
 
 
Application notes:
1. Confirm that the voltage and power parameters of the motor not exceed the range of the driver board as specified.
 
2. This driver board is used for 3-phase brushless sensorless motor, but not suit for all 3-phase brushless sensorless motors directly. If the driving effect is not good (such as starting jitter, reversing, the motor noload working current is too large, the speed is not stable, the efficiency is low, and can’t start-up with load.) Customers can adjust the resistance and capacitance of the driver board according to the actual situation to achieve the best driving effect (see the attachment for how to do the adjustment)
 
3. JYQD_V8.3Bdriver board is bare board without housing and heatsink. If the power of the motor below 60W ,it does not need to add heatsink, It only needs to ensure normal ventilation and well insulation. If the power of the motor more than 60W, it must add heatsink like the diagram as below.
 
4. Please take note that JYQD_V8.3B driver board has no anti-reverse connection protection, it will permanently damage the driver board if reversed polarity connection.
 
5. The 5V output port on the driver board prohibits connect external device. It is only applicable to the external potentiometer and switch of the board for speed regulation and reversal.
 
6. The “M” terminal on the JYQD_V8.3B driver board is the motor speed pulse output signal (push-pull output), and the maximum output current is less than 5mA.
 
 
 
Wiring diagram
5V -----Driver board internal output voltage
M ---- Motor speed pulse signal output port, 5V pulse signal.
 
1. Control port
Z/F---- Rotating direction control ports. Connect “5V” high level or no connect is Forward direction, connect 0 V low level or connect to GND is reverse direction.
VR ----Speed control port. Analog voltage linear speed regulation 0.1v -5V, The input resistance is 20K Ohm ,connect with GND when input PWM speed regulation, PWM frequency:1-20KHZ; Duty cycle 0-100%
GND—Used for Drive board internal control
 
2. Power port
MA ----motor phase A
MB ---- motor phase B
MC---- motor phase C
GND----DC-
VCC----DC +
 
3. Use shielded wires if the drivers board has more than 50 cm distance from the motor, otherwise it may lead to abnormal driving, affecting the normal use.
 
4.Control port distance: 2.54mm,Power port distance:3.96 mm
 
5. Pay attention to the insulation between the driver MOSFET and the heatsink or the installation plate.
 
 
 
Dimensional drawing
 
 
 
 
DOWNLOAD JYQD-V8.3B USER MANUAL
 

Hot Products

230V AC Round Brushless BLDC Motor Driver for axial flow ventilator fan (For Brushless Sensorless DC ...
JYQD-V8.3E brushless DC motor driver board for sensorless motor (For Brushless Sensorless DC motor ) ...
JYQD-V8.8 / JYQD-V8.8D AC input high voltage brushless motor driver board (For Brushless Sensorless ...
JYQD-V6.7 Arduino BLDC motor driver for sensorless BLDC motor 12-24VDC 2A current​ Model number ...
36VDC dual- motor controller JYQD-YL02C for wheelchair,hub motor,electric scooter,electric ...
12-36VDC 3-phase sensorless brushless DC motor driver board for sensorless BLDC motor Model number: ...