Active Member
|
[China]
Address: No 21, Linhe North Road,Shunyi Dist,Beijing,China
Contact name:Jack Guo
BEIJING SAMYON INSTRUMENTS CO.,LTD |
|
|
100 Ultrasonic Hardness Tester
Ultrasonic hardness tester is widely used to measure hardness of
small forgings, cast material, weld inspection, heat affected zone,
Ion-nitrided stamping dies and molds, forms, presses, thin walled
parts, bearings, tooth flanks, etc.
- Perfect Accuracy: ±3% HV, ±1.5HR, ±3%HB
- Microscopic Indentation: Only high-power microscope can observe the indentation
- Quick Measurement: Result in 2 seconds
- Large LCD Display: Directly display measurement result, times count, maximum, minimal, average and deviation.
- Friendly Operation: Operate well after short training
- Promised Warranty: 2-Year warranty for main unit (Excludes Probe)
- Mass Storage: Save 1000 groups measurement data
- Simple Calibration: Save 20 groups calibration data for invoking, improve calibration efficiency.
| Product Name | Ultrasonic Hardness Tester |
| Code# | #882-121 |
| Loading Force | 2Kgf (Optional: 1Kgf, 5Kgf, 10Kgf) |
| Measuring Range | HB: 85-650, HV 80-1599, HRC 20-70, HRB: 41-100, HRA: 61-85.6 HS: 34.2-97.3, Mpa: 255-2180N/mm |
| Measuring Accuracy | HV:±3%HV, HRC:±1.5HRC, HB:±3%HB |
| Indenter | 136° Vickers Diamond Indenter |
| Measuring Direction | Support 360° |
| Data Storage | To save 1000-groups of measuring data and 20-groups of calibration data |
| Hardness Scale | HV, HB, HRC, HRA, HRB, MPa |
| Data display | Loading force, Testing-times, Testing result, Average, Maximum, Minimum, Deviation and Conversion scale. |
| Hardness Indication | LCD display |
| Operating Environment | Temperature:-10℃~50℃, Humidity: 30%~80%R.H |
| Operating Voltage | DC 4.8V |
| Instrument Dimensions | 160x80x31mm |
| Net Weight | Approximate 500g (Without probe) |
Small Cylinder Support for Manual Probe Deep-hole Probe Protector for Manual Probe
