DEZHOU FEITENG ROAD CONSTRUCTION EQUIPMENT CO., LTD. |
Verified Suppliers
|
|
304 Stainless Steel Easy Transfer Continuous Production Corrosive
Materials Melting Plant With Customized Color
Description
FT series corrosive materials melting machine, without self heating
system, which consists of melting tank, sliding supporting platform
and electrical apparatus control system. The melting tank is
divided into two chambers. The upper one is melting chamber for
barrel material, the heating coil exchange heat with the barrel in
radiation way to achieve the purpose of material melting. The lower
chamber keeps up heating to reach the temperature of suction
pump(110 degree), then the pump pumps the liquid material into the
storage tank, if increasing the heating time, you can get higher
temperature.
Melting plant components
The equipment mainly consists of melting tank, lifting system,
tipping devices, drum plate, dripping liquid collect system,
hydraulic propulsion system, thermal oil heating system, liquid
pump, pipe system, and electric control system.
Working principle
The equipment adopts automatic spring door sealed box structure.
The drum is lifted by electrical hoisting. The hydraulic propeller
pushes drum plate into the melter, and using the hot thermal oil
from external boiler as the heating source.
Continuous production one full drum in and one empty drum out from
the other end.
Features
1. Structure of this equipment is a closed chamber with spring doors on both ends, the barrels are elevated by a small gantry crane and then pushed into the heating chamber by hydraulic propulsion unit. The equipment is of nice shape, compact and neat design, high production efficiency, stable and reliable performance, no waste or pollution and it is able to operate under all kinds of working conditions.
2. Fast barrel removal. The heat radiation area of the coiled heat transfer oil pipelines in the equipment is very large, it takes very short time to melt corrosive material and improves production efficiency to a large degree. The heating coils (heat transfer oil pipelines) are divided into two sections and each section is independently controlled. Heat can be properly allocated between upper compartment and lower compartment so as to ensure synchronization between barrel removing and corrosive material liquefying. The whole heating chamber is enclosed by thickened premium rock wool heat insulation panels, so the heat preservation is excellent.
3. Completely corrosive material removal from barrel. Temperature in heating chamber is quite high, and each barrel can be heated by heating coils closed to it, thus corrosive material get melt and drop down very quickly and completely from barrels, and there is no corrosive material adhere to barrel and there is almost no waste.
4. Automatic impurity removal. This equipment has a function of automatic impurity removal. Filtration devices are installed in the pipelines, and impurities in the barreled corrosive material can be removed by such filtration devices.
5. Customization: The equipment can be customized according to the dimension of the barrel.
6. Easy operation: Humanization design, convenient and easy to
operate, low labor intensity.
Model | FT-3 | FT-5 | FT-10 | FT-15 |
Production capacity (t/h) | 3 | 5 | 10 | 15 |
Tank capacity (m3) | 8 | 10 | 15 | 20 |
Drum quantity | 14 | 18 | 28 | 42 |
Number of drum rails | 2 | 2 | 2 | 3 |
Dimension (L x W x H) (m) | 7.9×2.2×2.55 | 9.1×2.2×2.55 | 12×2.2×2.55 | 12×2.8×2.55 |
Total power (kW) | 15 | 15 | 17 | 17 |
Thermal oil heater capacity (Kcal/hr) | 400,000 | 400,000 | 600,000 | 800,000 |
Our advantages
Our factory, DEZHOU FEITENG ROAD CONSTRUCTION EQUIPMENT CO., LTD.,
specializes in designing and manufacturing asphalt equipment,
mainly including asphalt melting equipment for drum/box/bag
packing, asphalt tank, asphalt emulsion equipment and asphalt
sprayer, also we have the big advantages as below,
1. Independent design and professional manufacturer.
2. Production capacity over 200 sets per year.
3. All equipments with compact structure, suitable for container
load.
4. Select premium steel with high quality.
5. Complete production control with detailed record and video.
6. Our factory had passed ISO system authentication, including
ISO9001, ISO 14001, OHSAS18001.
7. We manufacture our standard equipment, also welcome OEM and ODM.
Our service
Our factory, DEZHOU FEITENG ROAD CONSTRUCTION EQUIPMENT CO., LTD.,
specializes in designing and manufacturing asphalt equipment, you
may get as below,
1. Design drawing as your requirement
2. Equipment solution as your real condition
3. Quality equipment as your order
4. Quick response as your time
5. Fast delivery as your demand
6. Complete warranty as your expect
Quality product, quick response and cost saving.
Delivery and shipping
1. Production time around 5-15 days per set
2. Suitable for 40 HQ container loading
3. Trade terms EXW, FOB, CFR, CIF
After sale service
1. Warranty one year
2. Online support service and video technical support
3. Free spare parts
4. Field installation, commissioning and training, field
maintenance