Bimetal thermal protection performance parameters::
The company produces mainly KSD series thermostat sudden jump
bimetallic thermostat,Especially in high-power thermostat for the leading products in
this area we have a wealth of experience and strong R & D
capabilities,The company's production of temperature control performance, high
precision temperature control, carrying current, the product of
good synchronization.Key raw materials from abroad, with Emerson's comparable products.Now is the one obtained only through the 60A current CE, TUV, UL,
CUL and CQC safety certification.The company produces thermostat varieties, current from 5A-60A,Voltage from 110V-400V. Existing home but also for industrial use.
Bimetal thermal protection technical parameters: AC250V, 400V 15A-60A
Temperature range: -20-180 ℃
Reset Type: Manual reset
Safety Certification: TUV CQC UL CUL S ETL
Bimetal thermal protection performance and principle
KSD302 series thermostat is a bimetal strip housing fully enclosed
contact temperature temperature relay, according to the principle
of thermal expansion and contraction of the metal sheet is bent off
after reaching the set temperature, the temperature drops to the
set temperature can be automatically connected pass, play on electrical safety protection.
widely used: Widely used: welding machines, washing machines, air
conditioners, refrigerators, thermostats sanitary ware, electric
hot water bottle, electric kettles, electric heaters, electric
ovens, water heaters, drinking fountains, microwave ovens,
disinfection cabinets, electric pressure cookers, rice cookers temperature control and other industrial and home appliance
products.
Bimetal thermal protection Product Specifications
Function: temperature protection and thermal protection, anti-dry
Electrical Characteristics: AC250V / 15A ~ 30A ~ 40A ~ 50A ~ 60A
Maximum ambient temperature: 180 ℃
Operating temperature range: 0~ 180(optional). Temperature tolerance5
normal insulation resistance:> 100M
normal contact resistance100m
life:> 10,000 or more
Bimetal thermal protectionProduct Precautions
When using a contact temperature installation should be closely
aligns the charged surface of the metal lid of the appliance
mounting surface.
When installing the cap can not face pressure deformation, so as
not to affect the performance.
To prevent leakage, can not allow the use of liquid into the
interior temperature, so as not to affect the electrical
reliability.
This product is a bipolar wiring, when used according to label
symbols, correct wiring.
product should be less than 90% relative humidity, ambient
temperature below 40ventilated, clean, dry, non-corrosive gases
stored in the warehouse.