|
[China]
Trade Verify
Address: No.15,Zone 2,Mafang Industrial Park,Zhongguancun Science and Technology Park, Pinggu District ,Beijing
Contact name:Jackie
Beijing KES Biology Technology Co., Ltd. |
|
Verified Suppliers
|
|
|
Medical CE Approved E-light IPL RF Beauty Equipment for Wrinkle
Removal
Applications
| 750-1200nm | Hair Removal (Skin Type IV) |
| 690-1200nm | Hair Removal (Skin Type III) |
| 640-1200nm | Hair Removal (Skin Type I & II ) ; Wrinkle Removal |
| 590-1200nm | Pigmentation and Vascularity; Skin Rejuvenation |
| 560-1200nm | Vascular and Pigmented Lesions; Skin Rejuvenation |
| 530-1200nm | Skin Rejuvenation; Superficial Vascular Lesions |
| 510-1200nm | Superficial Vascular Lesions |
| 480-1200nm | Light Pigmentation |
| 430-1200nm | Acne |
| RF Treatment | Skin Tightening and Face Lifting |
How it works?
E-Light is the perfect combination of IPL technology with Bi-polar
Radio Frequency (RF) and Skin Contact Cooling.
Radio Frequency is independent of melanin and thus independent of
skin type. With Radio Frequency, increased selectivity and deeper
dermal penetration would be achieved, thus lower energy is applied
during the IPL treatment. Uncomfortable feeling during the IPL
treatment will be decreased significantly and better result can be
expected. That is, less optical energy (IPL), when
synergistically combined with Bi-polar RF, improves the safety
factor when treating all skin types.
Meanwhile, contacting surface cooling technology applied on the
treatment probe head can eliminate the heat effect attributed to
optical energy, and increase the resistance of surface skin, reduce
the RF absorption of the surface skin, greatly improving both the
treatment performance and safety. The technology is equally
applicable and effective to mild color target tissues.
Before And After
Unique Advantages
SHR mode:10 times/s
Intelligent + Professional mode = parameters setting automatically
Appearance design make excellent cooling
Strong system with 3 Capacitors and 2 power supplies!
Technical Specifications
| Wavelength (Spectrum) | 650-950nm(HR) |
| Energy Density (Fluence) | 1-26J/cm2(SHR) |
| Spot Size | 15x50mm2 (HR); |
| Pulse duration | 1-15ms |
| Pulse | Single |
| Pulse Repetition Rate | 1-10Hz |
| Timer | 1-30s |
| IPL Peak Power | 2500W |
| Cooling | Continuous Crystal contact cooling (-4°C-2°C ) + Air cooling + Closed water circulation cooling |
| Stand-by Working | Continuously for 18 hours |
| Display | 10.4" True Color LCD Touch Screen |
| Electrical Requirements | 100-240VAC, 20A max., 50/60Hz |
| Net Weight | 60 kgs |
| Dimensions (WxDxH) | 63*53*126cm |
Step 1: Remove all visible hair in the area you wish to treat with your
preferred hair removal method. If desired, the Braun Skin i·expert
Smart IPL includes a Venus razor for easy surface hair removal.
Ensure there is no hair remaining above the surface of the skin.
Then pat your skin dry.
Step 2: select the standard head or the precision head depending on the
size of the area you wish to treat. Plug in the Skin i·expert Smart
IPL.
Step 3: Put the nozzle in full contact with the skin to make sure the
product works correctly. If the light flashes white, a valid skin
tone is detected. If not in proper contact with the skin, the
device will not flash. In the case of a red light, there is not
full contact or it is an invalid skin tone.
Step 4: For larger body areas use gliding mode: hold down the treatment
button and glide along your skin. For smaller areas, press and
release the treatment button. For sensitive areas or if it’s your
first time, you can use the gentle or extra gentle mode.
Step 5: It is important to wipe clean the nozzle after every use.
Step 6: In the first phase of your treatment, treat once a week for 4 - 12
weeks. Then adjust to your needs (i.e. every 1-2 months).
Welcome to inquiry!!! Welcome to Beijing KES company!!
