|
[China]
Trade Verify
Address: No.126 Jincheng Rd., Xindeng Industral Area,Fuyang Dist. ,Hangzhou,Zhejiang Prov.China
Contact name:Yomi
Hangzhou Cuberyllium Metal Technology Co.,Ltd. |
|
Verified Suppliers
|
|
|
CuBe2NiTi Beryllium Copper Strip Coil 0.3x250mm HV>170 For Europe Market
CUBERYLLIUM Brande QBe1.9 Ageing(Soft) Beryllium Bronze Strip Coil For Electronic Connectors
Product Description:
Name: Ageing(Soft) Beryllium Bronze Strip Coil
Tape: Qbe1.9
Specification: 0.8mmx200mm
Tolerance: +/-0.015mm
State: Soft, Hard, Ageing(Soft), Ageing(Hard)
Surface: Bright/Polished
Application: For Electronic Connectors
Product Informance of CUBERYLLIUM® Company:
CUBERYLLIUM® manufactures copper beryllium in several distinct compositions. These fall into two categories: alloys selected for high strength (Alloys 172,173,170) and alloys selected for high conductivity (Alloys 751,750,741). And Gost standard QBe2,QBe1.9Ti(БрБ2;БрБНТ1.9) for Russia Market. Also Supply Master alloy : CuBeryllium-200; CuBeryllium-275);CuBeryllium-350 and Cuberyllium-400 to global factory.
CUBERYLLIUM ®-Qbe1.9 also named Cube1.9Ti. Qbe1.9 alloy contains appr.Ti 0.1~0.25% of Ti, has small elastic delay, small elastic hysteresis, high fatigue strength, stable elasticity when temperature changes, etc. The property compared with other beryllium copper alloys, Qbe1.9 alloy attains the highest strength and hardness of any commercial copper base alloy at age hardened condition. It is widely used in China military project.
Chemical Composition of Qbe1.9 Beryllium Bronze Alloy:
| CUBERYLLIUM® Brand | Gost- Number | Be | Al | Ni | Fe | Cu | Si | Ti |
| Qbe1.9Ti | БрБНТ1.9 | 1.87-2.10 | 0.15 max | 0.2~0.5 | 0.15 max | Balance | 0.15 max | 0.1～0.25 |
Typical Physical Properties of Qbe1.9 Beryllium Bronze Alloy:
Density (g/cm3): 8.25
Elastic Modulus(Gpa): 130
Electrical Conductivity: 22-28% IACS
Thermal Expansion Coefficient(m/m℃): 17.5x10-6
Thermal Conductivity(25℃): 105W/m℃
Melting Point (°C): 870
Mechanical And Electrical Properties of Qbe1.9 Beryllium Bronze Strip:
| Name | Temper | Thickness (mm) | Tensile Strength | Hardness | Elongation (min) |
| MPa | HV | Percent | |||
| Qbe1.9 | Soft | <0.15 | >390 | <120 | >30% |
| 0.15~0.25 | 390~590 | ||||
| >0.25 | 390~590 | ||||
| Hard | <0.15 | >590 | >160 | >3% | |
| 0.15~0.25 | 590~880 | ||||
| >0.25 | 640~930 | ||||
| After Ageing (Soft) | <0.15 | >1080 | >330 | >2% | |
| 0.15~0.25 | 1080~1470 | ||||
| >0.25 | 1130~1470 | ||||
| After Ageing (Hard) | <0.15 | >1080 | >360 | >1.5% | |
| 0.15~0.25 | 1130~1570 | ||||
| >0.25 | 1170~1570 |
Shape Available:
| Cold Rolled | Hot Worked | ||
| Strip | ✓ | Rod&Bar | ✓ |
| Round Bar | ✓ | Plate | ✓ |
| Square Bar | ✓ | Tube | ✓ |
| Sheet | ✓ | ||
Key Technology of Beryllium Copper(Heat treatment)
Heat treatment is the most important process for this alloy system. While all copper alloys are hardenable by cold working, beryllium copper is unique in being hardenable by a simple low temperature thermal treatment. It involves two basic steps. The first is called solution annealing and the second, precipitation or age hardening.
Solution Annealing
For the typical alloy CuBe1.9 Ti(1.85- 2.1%) the alloy is heated between 720°C and 860°C. At this point the contained beryllium is essentially “dissolved” in the copper matrix (alpha phase). By rapidly quenching to room temperature this solid solution structure is retained. The material at this stage is very soft and ductile and can be readily cold worked by drawing, forming rolling, or cold heading. The solution annealing operation is part of the process at the mill and is not typically used by the customer. Temperature, time at temperature, quench rate, grain size, and hardness are all very critical parameters and are tightly controlled by Cuberyllium.
Age Hardening
Age hardening significantly enhances the material’s strength. This reaction is generally carried out at temperatures between 260°C and 540°C depending on alloy and desired characteristics. This cycle causes the dissolved beryllium to precipitate as a beryllium rich (gamma) phase in the matrix and at the grain boundaries. It is the formation of this precipitate which causes the large increase in material strength. The level of mechanical properties attained is determined by the temperature and time at temperature. It should be recognized that beryllium copper has no room temperature aging characteristics.
Product Photo:
FAQ:
Q1: Could you produce Beryllium Copper strip by Mill Hardened
process.
A1: Yes, we could produce AM(TM00), 1/2HM(TM01).HM(TM04) XHM(TM06)
XHMS(TM08).,we are the only factory could do harden strip in China.
Q2: What’s the advantages the Beryllium Copper of CUBERYLLIUM®.
A2: 1: The Biggest Coil weight could be reach 1200kg/Coil
2: We are the only one who melting by Vacuum semi-Continuous Furnace.
3: Surface further polishing for top clients.
Q3: Why you melting by Vacuum semi-Continuous Furnace.
A3: Could be get the Cast ingot without gas,smaller segregation,
Grain Refinement
Q4: What's the payment terms?
A4: We accept T/T, L/C, Paypal etc. It can be negotiated when the
amount is different.
