Active Member
|
[China]
Address: 8/H，No.18, HAIYU Road, Xiamen Area of China (Fujian) Pilot Free Trade Zone
Contact name:Aaron Liu
BENE MACHINERY CO., LTD. |
|
|
Chinese heavy duty forklift factory 25ton to 28ton/30ton container reach stacker with Cummins engine
1.Adopt CUMMINS diesel engine, which features sufficient power, large torque, strong overload capacity, reliable work, and low oil consumption
2.High strength solid steel gantry fork fixed with fork with regulator.
3.Heavy duty torque converter installed for smooth rotation of
power within the internal combustion engine, to rotating-driven
loads. Torque converter supersedes the mechanical clutch,
effectively allowing the load to be configured from the power
source.
4.Fitted with handy steer with maximum freedom, provides steering
conveniences.
5.An ideal operation friendly in the engineering and industrial
sectors.
6.Steering axle: adopt full-hydraulic steering gear with transverse
cylinder, which helps ensure flexible steering and high reliability
7.The gearbox and torque converter are of reliable quality and
stable performance.
8.The transmission mode is hydraulic transmission (flexible
transmission), being stable and convenient to operate.
9.Brake system is famous brand product, with reliable brake
performance.
| Item | Specification | Unit | |||
| General | 1 | Model | FD250 | ||
| 2 | Power Type/model | Diesel | |||
| 3 | Rated Capacity | Kg | 25000 | ||
| 4 | Load Center | mm | 1200 | ||
| Dimensions | 5 | Lift Height | mm | 4000 | |
| 6 | Fork Size(LxWxT) | mm | 2400×280×100 | ||
| 7 | Fork Spread(outside)(Min./Max) | mm | 970/2640 | ||
| 8 | Mast Tilt Angle(F/R) | deg | 6°/12° | ||
| 9 | Fork Overhang | mm | 970 | ||
| 10 | Length without forks | mm | 6550 | ||
| 11 | Overall Width | mm | 3060 | ||
| 12 | Mast Lowered Height | mm | 3970 | ||
| 13 | Overhead Guard Height | mm | 3550 | ||
| 14 | Outer turning Radius | mm | 6200 | ||
| Performance | 15 | Speed(Unload/Load) | Travel | km/h | 30/26 |
| 16 | Lifting | mm/s | 300 | ||
| 17 | Max.gradeability(Load) | % | 20 | ||
| 18 | Max.drawbar pull(Load) | KN | 180 | ||
| 19 | service Weight | kg | 32000 | ||
| Wheels&Tires | 20 | Tire | Front | 4×14.00-24-24PR | |
| 21 | Rear | 2×14.00-24-20PR | |||
| 22 | Tread | Front | mm | 2200 | |
| 23 | Rear | mm | 2350 | ||
| 24 | Wheelbase | mm | 4250 | ||
| 25 | Ground Clearance(Under mast) | mm | 360 | ||
| Power & Transmission | 26 | Battery | Voltage/Capacity(5HR) | VA/h | 2X12/120 |
| 27 | Engine | Model | WP10G220 | ||
| 28 | Manufacture | WEICHAI | |||
| 29 | Rated Output | Kw | 162 | ||
| 30 | Rated Torque | N.m | 786 | ||
| 31 | No.Of Cyinder | 6 | |||
| 32 | Bore*stroke | mm | 114/135 | ||
| 33 | Displacement | L | 8.3 | ||
| 34 | Transmission | Type | Fluid Torque Converter | ||
| 35 | StageFWD/RVS | 2/1 | |||
| 36 | Operating Pressute | Mpa | 19 | ||
