1 Layer Circular Vibrating Screen Separator For Resin Paint

1 Layer Circular Vibrating Screen Separator For Resin Paint

1. Working principle

Circular Vibrating Screen Separator uses eccentric block(YK type)/eccentric shaft(YA type) to produce strong exciting force, due to the unbalanced centrifugal force of inertia of the weights on the exciter, screen box vibrates, it can obtain different amplitudes by changing the exciter eccentric weight.

2. Advantage and Features

1. It can be used with single or multilayer screen cloth.

2. Automatic dicharge of materials,continuous operation.

3. No dead corner of parts,easy rinse thoroughly and disinfection.

4. High screening precision,high efficiency,suitable for any power,grain and mucus materials.

5. New grid structure,long service life of screen cloth,only 3-5min for screen replacement.

6. Small volume,less space occupation,easy to move,360 degree adjustment of discharge opening.

7. Fully enclosed structure,no flying dust,no liquid leakage,no blocking of mesh opening,screen can reach

3. Application fields

Chemical industry: resin, paint, industrial medicine, cosmetics, paint, traditional Chinese medicine powder, etc.

Food industry: powdered sugar, starch, salt, rice noodles, milk powder, soy milk, egg powder, soy sauce, fruit juice and so on.

Metal, metallurgical mining industry: aluminum powder, lead powder, copper powder, ore, alloy powder, electrode powder, manganese dioxide, electrolytic copper powder, electromagnetic materials, grinding powder, refractories, kaolin, lime, alumina, heavy calcium carbonate, quartz sand, etc.

Pollution treatment: waste oil, waste water, dyeing and finishing wastewater, auxiliaries, activated carbon and so on.

4. Installation and commissioning

A. the concrete foundation should be made according to the installation drawing before installation, and the flatness error of embedded anchor bolt or embedded steel plate is less than 3 mm.

B. After installation, check and adjust the springs at all levels so that the force of each support position is uniform, the axis of the motor should be 3-5 mm lower than the axis of the vibrator, and the support spring at the symmetry point should be horizontal (error < 3mm).

C, all parts of the screen machine should be firmly connected, all bolts should be fastened once before starting.

D. By adjusting the angle or weight of the eccentric block of the vibrator, the excitation force can be adjusted, so as to adjust the amplitude of the screen machine.

E. the distance between other obstacles is not less than 100mm.

5. Technical parameters