Active Member
|
[China]
Address: No.388 Heping Road, Xinxiang City, Henan Province,China
Contact name:Emily
Xinxiang jinrui machinery factory |
|
|
Sidewall belt conveyor is continuous transporting equipment for loose bulk materials such as coke, coal, limestone, sand and gravel. It adopts high quality conveyor belt with corrugated sidewall and horizontal baffle. Sidewall belts are used to convey material up inclines. The sidewall increases the carrying capacity of the belt and prevents product from falling off the edges of the belt. Hot vulcanization provides 5 times greater adhesion between the belt and sidewall, eliminating the need for bolting the sidewall to the base belt. Greater adhesion also prevents the sidewall from lifting and separating from the base belt, extending the belt life.
1. No spillage with steep angle conveying,long lifespan
2. Larger production grain sizes can be handled
3. Reduced energy consumption to save money for you
4. Able to conveyor material at any angles up to 90 degree to save
space for you
5. Higher conveyance capacity
6. Extremely high stability is provided in the traverse direction,
good longitudinal flexibility
7. Low maintenance requirements
8. Hot vulcanization provides 5 times greater adhesion between the
belt and sidewall, eliminating the need for bolting the sidewall to
the base belt.
9. Can be sealed and environmental friendly
Continuous conveying equipment for general purpose bulk materials
Widely used in coal, chemical industry, building materials, metallurgy, electric power, light industry, food, port, shipping and other industries.
In the working environment that the humidity is -15 degree to +40 degree, transport a variety of bulk materials which density is 0.5-2.5t/m3.
Max inclined angle is 90°, max pellets size is 550mm.
| Belt Width | Sidewall | Baffle | Effective | Particle | Speed | Capacity |
| Height | Height | Width | Range (mm) | Range (m/s) | (m3/h) | |
| 500mm | 80mm | 75mm | 250mm | 50-100 | 1.0-2.0 | 84 |
| 500mm | 100mm | 90mm | 250mm | 55-110 | 1.0-2.0 | 112 |
| 500mm | 120mm | 110mm | 250mm | 60-120 | 1.0-2.0 | 98 |
| 650mm | 100mm | 90mm | 350mm | 55-120 | 1.25-2.0 | 156 |
| 650mm | 120mm | 110mm | 350mm | 60-140 | 1.25-2.0 | 140 |
| 650mm | 160mm | 140mm | 300mm | 80-160 | 1.25-2.0 | 186 |
| 800mm | 120mm | 110mm | 460mm | 60-140 | 1.25-2.0 | 186 |
| 800mm | 160mm | 140mm | 410mm | 80-180 | 1.25-2.5 | 318 |
| 800mm | 200mm | 180mm | 410mm | 100-200 | 1.25-2.5 | 360 |
| 1000mm | 160mm | 140mm | 550mm | 80-180 | 1.25-2.5 | 428 |
| 1000mm | 200mm | 180mm | 550mm | 100-250 | 1.25-2.5 | 483 |
| 1000mm | 240mm | 220mm | 550mm | 140-280 | 1.25-2.5 | 683 |
| 1200mm | 160mm | 140mm | 690mm | 80-200 | 1.25-2.5 | 535 |
| 1200mm | 200mm | 180mm | 690mm | 100-250 | 1.25-3.15 | 765 |
| 1200mm | 240mm | 220mm | 690mm | 140-280 | 1.25-3.15 | 1077 |
| 1200mm | 300mm | 260mm | 640mm | 160-310 | 1.25-3.15 | 1358 |
| 1400mm | 200mm | 180mm | 830mm | 100-250 | 1.25-3.15 | 920 |
1. Belt conveyor should be operated in according to design
requirement.
2. Belt conveyors are not allowed to overload run.
3. Check wear condition of the belt, the damaged should be
repaired.
4. Operators should circuit to inspect to close observe belt
conveyor running. Especially,temperature rise and noise of main
motor and the brake working whether they are normal; contact state
of the brake and oil level, noise of gear unit and run off of belt
should be noticed;temperature rise and noise of all bearings and
state of all transition loads point should be noticed;
5. notice to see whether the hopper are blocked, working state of
pulley, idler, belt cleaner, take-ups and control equipment.
6. Operators should make good record if any abnormal. The belt
conveyor should be stoppe on emergency.
7.Periodic overall: Minor overall should be once every monthes
besides ordinary maintenance Overhaul should be once half past year
or once every year.
