|
[China]
Trade Verify
Address: No.2 Building 13, No. 6 Fengxi Road,Caijiagang Town, Beibei District,Chongqing,China
Contact name:Elva Zhang
Allwin Machine & Equipment Co.,Ltd |
|
Verified Suppliers
|
|
|
50 Litre Horizontal Bead Mill SS304 Or Sic Ceramic For Water Ink UV Ink Oil Ink
The main introduction:
1. High independent technology: This Bead Grinder mills are main consists of chamber and disc dispersing system. The double end mechanical sealing with indepent technology could resistant to more than 1600 kinds of solvents.
2. Urtra fineness: The series have great flow rate and super fine discharging, the finally fineness can be reach 1um for D90 .
3. Better Cooling system:The cooling efficiency is better than normal mills because the sectional double spiral water course is more beneficial to heat exchange.
4. High Efficiency: The grinding efficiency is higher 15-30% than traditional mill machines; the combined disperser can rapidly increase dispersing efficiency.
4. Different materials chosed for inner chamber and dispersing discs: All the materials of contact parts could be chose from wearable steel, stainless steel, PU and ceramics for meeting different requirements.
5. Bigger and Smaller grinding media for different needs: The grinding media is extremely from 0.3-3.0mm are suitable for this series mills. We recommend the 95% zirconium beads. The discharging is great flow with bigger screen rings which can be easily cleaned and removed.
The Technical Data:
| No | main parameters | SP30 | Note |
| 1 | Non Explosion-proof motor kW | 30kW (Non Ex) | |
| 2 | Effective volume of grinding chamber (L) | 30 | |
| 3 | Water pressure (MPa) | 0.3 | |
| 4 | Cooling water consumption (L/min) | 2.5 -3m3/h | Advise offer the Cooling water less 10°C |
| 5 | Dimensions:L*W*H (mm) | 2000*900*2000 | |
| 6 | Weight (kg) | 1400 |
The Configuration instructions:
1. Outer chamber materials: 304 stainless steel
2. Inner Chamber materials: 316 stainless steel or you need
3 .Dispersing shaft: 40Cr with hard chromium plating
4. Dispersing disk: 304 stainless steel
5. Feeding and discharging end covers on the cylinder: 304 stainless steel
6. Turbine centrifugal separator and pins: 304 stainless steel and YG6 pins
7. Static discharge screen ring: Wire Wound screen ring with 304.Gaps: 0.5mm.
8. Mechanical seal: Intelligent double mechanical seal with indepent technology
9. Feeding pump: 1” ARO diaphragm pump;
10. Appliance configuration: Non Explosion-proof machine, suitable for water base materials, motor 55kW. Non Explosion-proof parts: operation column,electrical appliance boxes;electric contact pressure gauge, temperature,solenoid valves with NO ex electrical contacts., Control system (button type).
11. Fasteners and connecting parts: Stainless steel clamp-type connecting parts.
The 11 Patents about Bead Mill
The Application filed: Paint and Coating,Pigment and dyestuffs,Printing inks/ Digital inkjet ink,Gravure inks,Medicine and Cosmetics,Pesticide and Agrochemical industry,Food and food processing,Non-metallic minerals,HI-Tech nanometer products,Paper and Paper making chemical.
The After sales service:
1. Video instructions for installation and commissioning, if need, we will arrange engineer to your factory.
2. 12-24H feedback any customers questions, firstly offer the video help you solving, if need arrange maintenance engineer for you.
The package and shipping: Be covered with anti-abrasion film and then packed in wooden boxes, then seashipping by FCLor LCL.
Also offered the related products: Dispersing machine & the Zirconical beads, This 2 products are much important for the Bead mills, this materials is pre-dispersing well, It's better for grinding with bead mill after pre-dispesing well. Also the zirconia beads (grinding beads with different size for meeting different finally fineness.
Note:
1.We will recommend the suitable bead mills according to your
information and demand, such as industry, fineness, temperature,
viscosity,production capacity etcs.
2. The Materials of inner chamber and Dispersing disks can be
chosed according to your different grinding materials and
industries.
3. The control system will be matching of different demand, such as
PLC or traditional Button type.
If need more detailed information and Price, please don't hesitate
contact us, Also Warmly welcome to visit us.
