Home Companies KingPo Technology Development Limited

IEC60320-1 Switch Tester Coupler Lateral Pulling Test Machine

Contact Us

[China]

Trade Verify

Address: RM C, 13/F, HARVARD COMMERCIAL BUILDING, 105-111 THOMSON ROAD, WAN CHAI, HK

Contact name:Lynette Wong

KingPo Technology Development Limited

Verified Suppliers
  • Trust
    Seal
  • Verified
    Supplier
  • Credit
    Check
  • Capability
    Assessment

IEC60320-1 Switch Tester Coupler Lateral Pulling Test Machine

Country/Region china
City & Province hong kong hong kong
Categories Measuring & Analysing Instrument Design Services

Product Details

Coupler Lateral Pulling Testing Apparatus

 

 

Product Information:

 

This device is according to the IEC60320-1, figure 19 standard requirement to design. It is used for the testing of withdrawing appliance inlet under the conditions of the connector with force, for this reason to test the mechanical strength of the connector.

 

Technical Parameters:

 

1, Flexible cable bending height: 40±2 mm, adjustable.

2, Pull range: 0-100N.

3, Pull way: Manual operation,50 times in one direction and then 50 times in the opposite direction.

4, Conductor Selection and the corresponding test lateral pulls value table

 

Table 7 - Values for the lateral pulls applied

 

Rated current of connector

A

Pull

N

2.56
635
1035
1650

 

 

Using method:

1. Select the corresponding apparatus input socket according to the required test of the connector to install and tighten.

2. Insert the connector into the input socket of the appliance, you can adjust the adjustment block properly for other special connectors.

3. With the spring balance end to lock the connector soft cable, flat on the bakelite supporting block.

4. To pull the connector to the required test force, and the position can be adjusted.

5. Normal test, after pulling 50 times, rotate connector and appliance input socket 180°, and then pull 50 times. Do not need to release spring balance end, then corresponding rotation.

After the test, whether to enter the follow-up test according to the connector is damaged or not.

 

Note:

1. Ensure that the terminal is clamped and pay attention to safety when testing;

2. When spring scale is not in used, it should be kept loose state;

3. Apparatus should be kept dry, dust proof, pay attention to the maintenance of the equipment after the test is completed.

0-100N IEC60320-1 Switch Tester Coupler Lateral Pulling Test Machine

Hot Products

Project Overview The energy efficiency laboratory of the electric water heater is designed and ...
Lab Technical Solution of Refrigerator And Freezer Performance Refrigerator and freezer performance ...
ECM Electric Motor Testing System , Low Noise DC Brushless Motor Test Bench Name:ECM Brushless DC ...
800w 400w 80w Aviation Electric Motor Testing System , Online Test System Name: Aviation Motor ...
Items Model Description Standard E26 Lamp cap gauge 7006-29B-2 gauge with reference diameter of 23mm ...
Items Model Description Standard E26 Lamp cap gauge 7006-29A-2 gauge for caps on finished lamps for ...