|
[China]
Trade Verify
Address: Room 322, Building 3, No. 801, Qiaoxing Avenue, Xiaoluo Village, Shatou Street, Panyu District, Guangzhou
Contact name:Sammy Qin
Guangdong XWELL New Energy Technology CO., LTD. |
|
Verified Suppliers
|
|
|
Description
The Battery Sticking Machine is mainly used for puching and
sticking protection film, like barley paper, on cylindrical cell
positive pole.
Why need sticking machine?
The battery pasted with insulating paper to avoid short circuit of
the battery itself or short circuit of the battery pack during the
assembly process, which may burn out the protection circuit or
components, and damage the human body in the worst case.
Commonly used are barley paper, fast red bar, PVC and so on. Barley
paper has good insulation, water resistance and abrasion
resistance, which can effectively prevent the positive and negative
poles of the power battery pack from short-circuiting during
vibration.
Usually need to paste the insulation protection position:
1. Between the contact surface of the BMS board and the battery
cell: the paper is required to completely cover the contact surface
of the BMS board and the battery to avoid short circuit of the
battery;
2. Protect the overlap position of the different polarities of
nickel strips, pads, traces and plugs and leads on the BMS board:
insulation is required to completely cover the contact surface that
can cause a short circuit between the two to avoid short circuit of
the battery;
3. When the batteries are connected in series, the joint insulation
pads should be attached to the series end, and then the nickel
strip should be spot-welded in series to prevent the positive pole
cell in the series from short-circuiting;
4. When the battery cells are connected in parallel, the positive
pole of the battery should be attached to the barley paper device.
The positive pole of the battery cell should be attached to the
joint insulation pad. The positive pole of the battery can be
attached to the barley paper device, and then the nickel strip can
be connected in series to prevent the battery itself from
short-circuiting.
How sticking machine works?
The sticking machine is controlled by microcomputer to complete the
test and sorting of stepping motors and cylinders, and realize the
function of sticking barley paper to qualified cells. The number of
finished cylindrical cells is about 4000 per hour. The mechanical
structure design is simple and generous, and the system performance
is stable. In the current market, one of the most cost-effective
cylindrical battery sticking barley paper equipment so far.
Features
1) Design for cylindrical (18650, 21700...) battery barley paper
sticking.
2) Suitable for battery pack assembling factory.
3) Good sticking quality, standard, beautiful appearance, no fall
off.
4) 7.0-inch touch screen, PLC programming is easy to operate, comes
with fault alarm, can clear the fault according to the prompt.
5) Large-capacity battery feeder, can put 500 cells in one time
6) Scraping material collecting system.
Structure
Details
Parameters
Our project
India project
This project is localed in Inda, Gurgaon. The client was founded in
1994, have more than 400 staffs and 10000+ square factory.
They bought 2 full of battery pack assembly line from us, includes
sorting machine, welding machine, sticking machine, charge and
discharge machine…
We have sent 3 engineers to client site for machine installation
and training in year of 2019. The training taked about one week.
After the training, the client engineers are learned how to
operation the machines in a smooth and high efficiency way. They
made high-quality products by our machines.
We had a nice journey in India.
