Single lane: Bridge deck width: 4.2m.
Span length:
9.14-60.9m
Double lanes: Bridge deck width: 7.35m.
Span length: 9.14-57.9m
The compact 200 panel bridge is similar to the compact 100 panel
bridge from their appearance. The difference is its increased panel
height to 2.134m. It employed the method of alternating joints
between Reinforcement Chords and the joints between panels. This
method can decrease inelastic deformation caused by the oversized
pinholes. Pre-arch method is used to additionally cut down
mid-span and vertical deflection to a larger degree. Bolt-connected
components use the orienting sleeve- fixing method to increase
accuracy of connections. Shear is created in orienting sleeves and
tension is developed in bolts, which increase the usage life of the
bolts and ensure the safety of panel bridges. Wind resistant brace is made to be composite type and is connected
to transom/girders to improve overall stability of panel bridges.
The part between braced frame and panels is fixed through bridging so as to prevent the whole bridge from
side bending. After the erection, there will be a pre-arched degree
over the span of the bridge. Besides it can be assembled into
single-lane bridges. The compact 200 panel bridge can also be
assembled into double lane bridge, hence it broadens its
application range. It is suitable for the load designs of HS-15,
HS-20, HS-25 and pedrail-50 etc.
If you want the Bridge design-Load-Span table,Pls click request a quota.