Active Member
|
[China]
Address: Buiding A, No.138, Santun Industrial Boulevard, Houjie Town, Dongguan,Guangdong,China.
Contact name:manager
Shenzhen Green Source Light Equipment Co., Ltd. |
|
|
High Intensity Omni-directional Aviation Obstruction Light Type A and B
| Specification | |
| Model: | GS-HI/O |
| FAA Standard: | L-856 |
| Light intensity: | 2000~100000cd(±25%) |
| Power Voltage: | AC 110V/220V DC48V/24V/12V |
| Power Supply Frequency: | 50Hz～60Hz |
| Flash rate: | 40-60times/minute |
| Continuous Working Time: | 70ms |
| Service life of light source: | ≥10years |
| Power consumption: | 150W |
| Overall size(mm): | 234mm×234mm×406mm |
| Installation size(mm): | 180mm×180mm×M10 |
| Vertical degree: | 7° |
| Horizontal degree: | 360° |
| Optically Controlled Ambient Brightness: | 50cd-500cd/m2 |
| Weight: | 16Kg |
| Emitting color: | White |
| Ambient temperature: | -40℃～50℃ |
| Wind load: | 80m/s |
| Protection standard: | IP68 |
| LED quantity: | 240×10W |
| 500cd/m²: | Type A 200000cd±25%,typeB 100,000cd±25% |
| 50~500cd/m²: | 20,000cd±25% |
| ＜50 cd/m²: | 2,000cd±25% |
Features
1. Advanced optical projection lens design, emitting angle follow FAA
standard.
2. With function of automatic light-control function, it can change
light intensity class on daytime, rainy day and at night.
3. LED light source, its service life can above 100000 hours.
4. Low voltage design, high safety for maintenance and utilization.
5. Anti-shock,lightning protection, light fastness,
anti-sleet,resist typhoons, the hail weather.
6. Adopts constant current circuit design, the longer service life.
7. Adopts changeable LED light source that can reduce the
maintenance charge in the future.
8. No radio frequency (rf), no electromagnetic interference.
9. With lighting protection function
10. Adopts transparent glass cover which has the characteristics of high transmittance and chemical
resistance,under the bad environment there will be no discoloration and
cracking phenomenon.
Attention / Usage Tips
1. Don't use any out of nominal voltage,or will destroy equipment.
2. Do not open it if the device is out of operation, in order not to be hurt by the internal high
pressure.
3. After finished the installation, the personnel must check
whether the device is in a good waterproof processing and whether the screw spikes are
tightened.
4. Non-professional workers can not do the device maintenance, in order not to expand the error and be hurt.
Application
Dimension drawing
