Active Member
|
[China]
Address: Room D-011 No. 517 Ming-ze Peninsula Luoshi South Road, Hongshan District, Wuhan City
Contact name:Cassie Xiong
Wu Han Micro Control Electric Co., Ltd. |
|
|
Metal Case Tension Compression Load Cell Power DC 5V High Performance For Tension Controller
Metal Case Tension Compression Load Cell Power Supply DC 5 V 100kg
Sensitive devices STS series of tension sensor is feeling ,detecting of tension,it put in the micro tension displacement,then transfer into micro voltage.
STS serial is a With the feedback of tension sensor type surporting
the use of tension controller.
The shape,size,mounting holes and mode of connection of our sensor
are similar to LX-030TD,LX-050TD which made by Mitsubishi Co.
True Engin supply offices and agents will provide a perfect
after-sales service for you.
| Model | STS-100 |
| Power supply | DC5V |
| Rated Voltage | Small base: 10~100kg; Large base: 200 kg~500kg |
| Working Principle | Differential type |
| Rated Output | 0~180mv |
| Bearing | P204 ball shape universal bearing P204 |
| Electrical Connection | +5v:Red GND:Black Signal(+):Yellow Signal(-):Green |
| Outsize | Small base:134*44*78mm Large base: 150*68*78mm |
Packing and Delivery:
Packing(Packaging & Delivery)
Packaging Details:
Paper CTN
Delivery Detail:
1~3 working days after payment confirmation
Attention of public use:
A. Please use the universal ball bearing seat,prevent about sensor influence each other.
B. Bearing between the sensor and the installation of the screw is
too long, avoid small slant to the sensor area.(It is recommended
to use less than 15 mm screw)
C. Load force should not be refers to the fixed end
sensor,otherwise the output signal will be small.At this time can
be installed of course.
D. Thin film of angle as far as possible not more than 120
temperature.
E. Moisture-proof,water proof,prevent corrossive gas,liquid erosion
sensors.Prevent strong percussion,impact sensors.
