Active Member
|
[China]
Address: Room D-011 No. 517 Ming-ze Peninsula Luoshi South Road, Hongshan District, Wuhan City
Contact name:Cassie Xiong
Wu Han Micro Control Electric Co., Ltd. |
|
|
Whole Edge Position Control System With Digital Controller Edge Sensor And Edge Motor
Rolling material edge position control system overview
System Composition
Edge position control system is consists of edge position controller, edge position sensor, and servo motor drive 3 parts.
Application:
Suitable for edge position control of printing machine, splitting machine, compound machine, coating machine, rubber machine, textile machine etc.
Sensor for suitable material
| Material | Photoelectric sensor EPS-A | Photoelectric sensor EPS-B | Ultrasonic sensor EPS-C | Reflective shade guide Sensor EPS-D |
| Transparent Film | √ | |||
| Non-transparent film | √ | √ | √ | √ |
| paper | √ | √ | √ | √ |
| foil | √ | √ | √ | √ |
| Sheet metal | √ | √ | √ | √ |
| textile | √ | √ | √ | |
| Breathable material | √ | √ | √ | |
| Photosensitive material | √ | |||
| Dusty environment | √ | |||
| Deviation method | Trace edge | Trace edge | Trace edge | Trace edge, trace line |
Edge position control system’s selection
1. Servo edge position control system constitute
Features: high accuracy, fast respond, support to trace edge and trace line working mode
Controller: EPC-200 analog edge position controller
Detector:
| Item NO. | EPS-B | EPS-C | EPS-D |
| Detection Mode | Photoelectric correlation | Ultrasonic correlation | Aberration correlation |
| Tracing mode | Trace edge | Trace line | Trace edge/line |
Motor drive: EPD-204
Features: cost-effective web guiding system, support to trace edge and trace line working mode, but it is not suitable for transparent material.
Controller: EPC-100 digital edge position controller
Detector:
| Item NO. | EPS-A | EPS-B |
| Detection mode | Photoelectric reflection | Photoelectric correlation |
| Tracing mode | Trace edge | Trace edge |
Motor: EPD-104
Features: suitable for transparent material, support trace edge working mode, high performance & cost-effective.
Controller: EPC-100 digital edge position controller customized
Detector:
| Item NO. | EPS-C |
| Detection mode | Ultrasonic correlation |
| Tracing mode | Trace edge |
Motor: EPD-104
Digital edge position controller EPC-100
EPC-100 edge position controller is a high accuracy controller can trace the edge of material. It is high reliability, high anti-interference, long life spam. EPC-100 with photoelectric sensor and synchronous motor, which constitute digital edge position control system, is widely applied in printing, packaging, textile industry of roll materials’ edge position control.
Features
Photoelectric sensor EPS-A
EPS-A photoelectric sensor is coaxial reflective type edge position sensor, suitable to trace edge of non-transparent material for web guiding control.
Features:
| Specification | |||
| Item No. | EPS-A | ||
| Power supply | DC 10~30V±10% Wave＜10% | Light source | Red, Green |
| current consumption | ≤45mA | Currency load | 200mA(max) |
| Output signal | High level Vs-(≤1.5V) Low level≤1.2V | Environment temperature | -15℃~+65℃ |
| Detect method | Coaxial reflective | Shell | plastic |
| Detect range | 10±2mm | Outgoing line | 4 cores Φ5.4 pvc jacket cable |
| Matched controller | EPC-100/300 | Suitable material | Non-transparent film |
| Electrical connection | Power supply (+): red Power supply(-): Black PNP signal: green NPN signal: white | ||
Ultrasonic sensor EPS-C
EPS-C ultrasonic sensor adopts The principle of high frequency ultrasound rectilinear propagation to detector the edge of material. Compared to photoelectric sensor, it is not affected by material transparency and easy to use. Suitable to trace edge of non-breathable material (eg. Plastic film, paper etc.), unsuitable for breathable material as cloth and non-woven material.
| Specification | |||
| Item NO. | EPS-C | ||
| Power supply | DC 12V | Output signal | 0-5V analog signal |
| Detect method | Ultrasonic correlation | Detect range | 5mm |
| Wave load frequency | 200KHZ | Detect accuracy | ±0.05mm |
| Protection level | IP54 | Shell | Aluminium alloy |
| Matched controller | EPC-200 and customized EPC-100 (trace edge) | Suitable material | Non-breathable film |
| Electrical connection | Customized EPC-100: power supply(+): red Power supply(-): black signal: green | ||
| EPC-200: 5P air plug docking | |||
Synchronous motor linear drive
EPD-100 series synchronous motor linear drive is with compact & reasonable compact, elegant appearance, strong mechanical strength, full connection spare parts, easily installed and running stable, , tiny mechanical wear, long service life, Can work match the EPC - 100 edge position controller.
Features:
| Specification | |
| Item No. | EPD-104 |
| Stroke | 150mm |
| Thrust | 200kg |
| Thrust-weight | 2T |
| Max drive speed | 10mm/s |
| Configuration | Detector: EPS-A/B, EPS-C with customized EPC-100 |
EPC-100manual instruction -1.pdf
EPC-100manual instruction -2.pdf
EPC-100manual instruction -3.pdf
EPC-100manual instruction -4.pdf
