ZhongHeng Machine Manufacture Co.,Ltd |
|
.Cheap Roofing Sheet Roll material Forming Machine with iron welding cutting system for wall panel
Description
This model of machine make the wall panel ,its trapezoidal
IBR type ,but height of the wave is small,its usually used for the
around wall of the wearhourse .Welded iron cutting system save
cost.Its the best choice for the customers who are in small burget.
Specification
NO. | ITEM | PARAMETER | NOTE | |
1. | Suitable | Type | Pre-painted sheet, |
|
Width(mm) | 1000mm |
| ||
Thickness(mm) | 0.3-0.8mm |
| ||
Yield stress(mm) | G220-G300 |
| ||
2. | Product | Detail as the attached file | ||
Length | Any length |
| ||
3. | Power | Type | 380v/3ph/50hz | Motor brand shanghai Lichao |
Main Motor power | 4kw | |||
Cutter power | 3kw | |||
4. | Forming speed(m/min) | 8-10m/min | Not include the time of cutting | |
5. | Manual Decoiler | Type | Manual |
|
Max capacity | 5t |
| ||
Suitable coil OD(MM) | 1000 |
| ||
Suitable coil | 508 |
| ||
6. | Forming stand | 9 | Depend on actual design | |
7. | Thickness of structure | 16mm |
| |
8. | Forming shaft diameter(mm) | 70solid |
| |
9. | Type of cutting | Roll formed and length-set cutting |
| |
10. | Control system | Panasonic PLC and inverter |
| |
11. | Install dimension(depend on the final design) | 5.2m×1.1m×1.3m | Without panel length | |
12. | Total weight (Approx) | 3T | Depend on final design |
Flow chart
Uncoiling→Feeding material into machine→Roll forming→Measuring length→
Auto cutting→Products receiving
MachineComponents
No | Name | Quantity | Remarks | |
1 | Decoiler | 1set | Up to customer | |
2 | Main machine | Pre-cutting device | 1set | Up to customer |
Feeding device | 1set |
| ||
Roll forming system | 1set |
| ||
Post cutting device | 1set |
| ||
Hydraulic system | 1set |
| ||
3 | Electric control system | 1set |
| |
4 | Supporter/Automatic Stacker | 1set |
Competitive Advantage:
1. Low cost
2. Welded iron type
3. Single cylinda
4. excellent quality
5. Operate easily