|
[China]
Trade Verify
Address: No.8, Hehua Rd., Pudong New District, Shanghai, China, 201314
Contact name:Lyla Tan
Shanghai LIVIC Filtration System Co., Ltd. |
|
Verified Suppliers
|
|
|
Self-cleaning Automatic Back Flushing Filter Protect Nozzles and Pumps
Description
XF Series Automatic Back-flushing Filter is a new generation
self-cleaning filtration system independently designed by LIVIC, it
is integrated with a number of slotted filter elements. When the
filter elements are clogged, a specially designed back-flushing arm
will clean the elements one by one. As the high-end self-cleaning
filter, it is especially designed for customers who take good
quality and high eliability into consideration firstly .The XF
filter consists of world-class top quality crucial parts, such as
filter element, gear motor, control system, etc..
Compared with ordinary mesh type self-cleaning filter, XF Series
Automatic Back-flushing Filter has unparallel advantages. It has
rigid and durable V-SLOT filter element, highly uniform slot width,
large filter area in single filter, super high flowrate up to
3000m3/h in single filter, fine filtration at low surface flow
velocity, high reliability. It applies to the filtration of dirty
water containing oil sludge type impurities, soft and viscous
impurities, high content impurities, small amount of hairs and
fibers.
XF Series Automatic Back-flushing Filter, which filtration rating ranges from 50-2000 micron and its line size is available from 2’’ to 24’’.XF Filter has 3 sub-series: S series, as the large filter area filter, applies to high flowrate filtration or high precision filtration; M series, as the small filter area filter, applies to low flowrate filtration or rough grade filtration; T series are specially designed for super high flowrate at rough ratings. See the figure on page 3 to select the right series.
XF Series Automatic Back-flushing Filter can remove the solid particles from various water resource and low viscosity liquid (e.g. machining coolant ). It makes the fluid meet cleanness requirement and protects downstream key equipments from clogging, abasing and fouling. It increases the key equipment running efficiency and service life. XF Filter automatically works continuously on-line and reduces the downtime cost, maintenance cost and labor cost. XF Series Automatic Back-flushing Filter is the advanced solution for the self-cleaning filtration of water and low viscous liquids.
Specifications:
| Sub-series | XFM/XFS/XFT |
| Applicable Liquid | Water and liquid of low viscosity(<40cps), contaminant<300ppm |
| Lowest Working DP | Differential pressure between the outlet and discharging outlet >0.15MPa |
| Filtration Rating | 50-2000μm |
| Design Pressure Class | 0.6MPa/1.0MPa/1.6MPa/2.0MPa |
| Design Temperature | 0-95°C |
| Filter Area | 4970cm²-89530cm² |
| Self-cleaning DP | 0.05MPa—0.07MPa |
| Control System | parallel control of differential pressure and time |
| DP Instrument | Differential pressure transmitter, differential pressure switch |
| Gear Motor | 120W, three phase, 380V, protection class IP55, CCWU |
| Inlet and outlet size | 2"—24" |
| Connection Standard | flange,HG20592-2009(Standard Design), HG20615-2009(ANSI B16.5 compatible) |
| Filter Element | V-SLOT series slotted screen, material 316L/SuperDuplex/Ti2 |
| Wet Part Material | 304/316L/CS, special material available (such as 904L,duplex S.S.) |
| Inner Lining | Epoxy, PA11 for CS Housing or special anti-corrosion requirement |
| Housing Sealing Material | NBR(Standard/VITON(FKM) |
| Discharging Valve | Pneumatic stainless steel valve or butterfly valve, protection class IP65 |
| Facility Supply | Compressed air: clean and dry, 0.4-0.6MPa, 380V AC, 24V DC |
Advantages
Areas of application
Typical By-pass Pipeline Installation Diagram
