Home Companies HJ AUTOMATIC CONTROL TECHNOLOGY CO., LTD

Air Cooled Type Auto Parts Test Equipment Xenon Lamp Test Chamber

HJ AUTOMATIC CONTROL TECHNOLOGY CO., LTD

Contact Us

[China] country

Trade Verify

Address: No.6-36, Yaogu Farm, Shibi No.3 Village, Shibi Street, Panyu District, Guangzhou, Guangdong, China

Contact name:Tessa Huang

Inquir Now

HJ AUTOMATIC CONTROL TECHNOLOGY CO., LTD

Verified Suppliers
  • Trust
    Seal
  • Verified
    Supplier
  • Credit
    Check
  • Capability
    Assessment

Air Cooled Type Auto Parts Test Equipment Xenon Lamp Test Chamber

Country/Region china
City & Province guangzhou guangdong
InquireNow

Product Details

Xenon lamp weatherproof test chamber (air-cooled type) Auto Parts Test Equipment ISO 105-B04:1994 ISO4892-2:2006

 

Products Introduction:

Using a xenon arc lamp that can simulate the full sunshine spectrum to reproduce the destructive light waves existing in different environments can provide the corresponding environmental simulation and acceleration test basis for scientific research, product development and quality control.Aging tests were performed by material sample exposure to xenon arc light and thermal radiation.To evaluate the light resistance and weather resistance properties of some materials under the action of high-temperature light source.Mainly used in paint, paint, rubber, plastic, pigment, adhesives, fabric, cosmetics, aerospace, ships, automotive, electronics industry, packaging industry, etc.

 

Meet the standards:

AATCC16, ASTM G155, GB / T18244-2000, GB / T12831-91, GB / T8430-1998, ISO 105-B04:1994, ISO4892-2:2006, GB/T16422.2-2014, GJB150.7A-2009, GB/T1865-2009, ISO11341:2004, GB/T2423.24-2013, IEC60068-2-5:2010, etc.

 

Parameters:

ModelAM0028-SF-270AM0028-SF-500AM0028-SF-1000
Internal Box Size W * D * H (mm)600×750×600800×800×8001000×1000×1000
Outer box dimensions W * D * H (mm)1200×1350×19001350×1400×20501400×1600×2200
Temperature rangeRT+10℃~70℃
Black standard temperature40℃ ~100℃ adjustable (light cycle); 25~85℃ (dark cycle)
Humidity range30%~98%RH (in the dark); 20%~60%RH (when lit on)
Temperature uniformity±3℃
Temperature accuracy±0.1℃
Humidity accuracy±1%RH
Light pipe lamp sourceAir cooled type pipes (domestic or imported Q-LAB)
Lights pipe lifeAbout 1,200 hours
Power of lamp tube1.8KW or 2KW.5
Effective exposure area2200cm2~6400cm2
Light cycle time0~999H, M, and S are continuously adjustable
Rainfall time0~9999min continuous rainfall is adjustable
Rainfall cycleThe 1~240min interval (off) rainfall is adjustable
Water spray cycle18min / 102min or 12min / 48min (water spray time / no spray time)
Rain water pressure0.12~0.15Mpa
Water nozzle hole diameterФ0.8mm
Distance between sample rack and lamp200~500MM Adjustable
Light filter typeWindow glass filter, sun filter, ultraviolet filter, can choose one
Irradiation intensityFull spectrum ranged from290 to 2450 n m band from 400 to 1120 W/m2
The irradiance in the 420nm band was 0.55~1.1W/m2
Irradiance in the 340nm band was 0.35~0.7W/m2
The irradiance in the 300 to 400 n m band was 40 W to 60 W
Use materialOuter box material: S US201 stainless steel or cold tie plate paint
Internal box material: S U S, 304 high-quality stainless steel
Sample frame material: SUS304 high-quality stainless steel
Door frame: withstand high and low temperature aging silicone rubber door sealing strip
Equipment use conditionsPower supply: AC380V± 10%; 50±0.5Hz; 16KW three-phase five-wire system
Ambient conditionTemperature 5℃ ~30℃.Relative temperature 85%RH .Air pressure 86kPa~106kPa.
Safety protection deviceLeakage, short circuit, overtemperature, water shortage, motor overheating, overcurrent protection

 

 

 

Hot Products

IEC 60669-1 Test Equipment Self Ballasted Lamp Load Box Three Test Stations Standard for Self ...
IEC 60669-1 Test Equipment Inductive Load Box Three Test Stations Standard for Inductive Load Box: ...
PLC Control Temperature Rise Tester IEC60884 Test Equipment Six Stations​ Standard of Temperature ...
Conductor DC Resistance Meter IEC Test Equipment 10MΩ Measuring Range Standard of Conductor ...
IEC Test Equipment Apparatus For Checking The Withdrawal Force Standard of Apparatus For Checking ...
Insulation Sleeves Of Plug Pins Abrasion Test Apparatus Single Station Load 4N Standard of ...