Home Companies HJ AUTOMATIC CONTROL TECHNOLOGY CO., LTD

HJ0601 K-Thermocouple Temperature Measurement Test Corner

HJ AUTOMATIC CONTROL TECHNOLOGY CO., LTD

Contact Us

[China] country

Trade Verify

Address: No.6-36, Yaogu Farm, Shibi No.3 Village, Shibi Street, Panyu District, Guangzhou, Guangdong, China

Contact name:Tessa Huang

Inquir Now

HJ AUTOMATIC CONTROL TECHNOLOGY CO., LTD

Verified Suppliers
  • Trust
    Seal
  • Verified
    Supplier
  • Credit
    Check
  • Capability
    Assessment

HJ0601 K-Thermocouple Temperature Measurement Test Corner

Country/Region china
City & Province guangzhou guangdong
InquireNow

Product Details

Household Appliance Test Equipment Test Corner For Temperature Rising Test Of Electrical Appliance

 

Standard:

IEC 60335-1 ‘Household and similar electrical appliances – Safety – Part 1: General requirements’ clause 11.2 and clause 11.3

 

Application:

It is used to provide the required environment for the temperature rising test of all kinds of electrical, electrical products. It can be customized according to the different testing samples. Household Appliance Test Equipment

 

Feature:

The test point number on the test corner and point distribution is customizable.

Thermocouples used for determining the temperature rise of the surface of walls, ceiling and floor of the test corner are attached to the back of small blackened disks of copper or brass, 15 mm in diameter and 1 mm thick. The front of the disk is flush with the surface of the board.

This test corner adopts K-Thermocouple for measuring.

 

Parameter:

ModelHJ0601HJ0601A
Inner sizeL*W*H: 600*600*1000mm (Side plate*2, base plate*1,top plate*1)L*W*H: 1000*1000*1000mm (Side plate*2, base plate*1,top plate*1)
ThermocoupleThe diameter of the thermocouple is less than 0.3mm
Thermocouple arrangementAll lead on a connection line (optionally equipped with thermocouple plug and socket)
Sheet copperDiameter 15mm and thickness 1mm
Number of temperature measuring points32 points(Both sides of the plate are 12 points for each, 8 points on the base plate)100points(each plate has 25 measurement points)
The arrangement of temperature measuring points100*100mm, square stationing
PlywoodThe thickness is 20mm and the front side is painted with Berlin black and the reverse side is with gray film plate.
The movable partThere are 4 removable wheels installed on the bottom of the device.

 

Hot Products

IEC Test Equipment Ageing In An Air Bomb/Oxygen Bomb 0.55MPa Test Pressure Standard: IEC 60811-11-2 ...
IEC Test Equipment Thermal Ageing Oven with 1000L Volume Temperature range RT+10℃-200℃ Standard: IEC ...
IEC 60335-1 Test Equipment Cable Flexing Test Apparatus Figure 8 Standard: IEC 60335-1 Household and ...
Cold Bend Test Apparatus Manual Control IEC 60811 Test Equipment Standard: IEC60811-1-4 Common test ...
IEC Test Equipment Figure B.1 Calibration Device For Spring Hammer Test Apparatus Standard: IEC ...
IEC Test Equipment Flexible Cable Flexing Test Apparatus Flexing Angles Adjustable Standard: IEC ...