Corrosion Protection Industrial Steel Paint , Highlight Chemical Resistant Paint

Industrial paint corrosion protection of steel outdoor sculpture advertising paint

Product features:

1. Primer free and sandless (paint does not need to be polished or primed on galvanized sheet, acrylic and PVC, and can guarantee the covering power and adhesion without primer)
2. Strong adhesion (it can be directly sprayed on the clean and dry material surface without special treatment, which is time-saving and labor-saving, and the adhesion is the same as that of the primer, ensuring that it will not fall off for 3 years)
3. High brightness (paint does not need varnish to make surface, once forming, brightness can be comparable to the effect of spraying varnish)
4. Fast drying and small smell (paint is made of imported all materials, with small smell and little harm to human body)
5. Large spraying area (the spraying area of eblat paint is twice that of ordinary paint, saving cost and time)
6. Good weather resistance (at least 3 years without fading)

Scope of application: advertising paint is used for advertising spray painting, advertising words, various LED light strips, indoor / outdoor advertising signs of advertising light boxes, advertising signs, Anti corrosion of desulfurization tower,corrosion protection of steel structure,anti corrosion of oil tank,etc

Construction mix ratio of bright light: Paint: solid: thin = 4:1:appropriate amount
Construction mix ratio of matte: Paint: solid: thin = 4:1:appropriate amount
Construction mix ratio of semi gloss: Paint: solid: thin = 3:1:appropriate amount

Base material treatment and construction requirements

1. The base material must be cleaned to ensure no oil, embroidery and dust. Pickling, phosphating or solvent cleaning with white electric oil can be used.

2. A layer of antirust primer shall be applied to special base materials first. It shall be noted that the strong solvent top coat shall not be applied with weak solvent primer, and the top coat shall be applied after the primer is dry, otherwise the bottom may be undercut. Better use our primer

3. The construction viscosity is generally 16-22 seconds (4 cups). Viscosity is too low and easy to hang, not easy to cover; high, flow adjustment, wrinkles, and even blisters and pockmarks.

4. The air pressure should be kept at 0.5p8-0.8pa to ensure the good atomization of the paint mist, so as to avoid the occurrence of oil discharge and color floating, and the distance should be 25-30cm

5. When spraying, thin spraying shall be carried out for several times, and the last spraying thickness shall be carried out in the order of first up, then down, first secondary surface, then main visual surface, first inside and then outside. If the thickness is too thin, there is little film material and no leveling space, so that the film is rough and out of light

Saft Precautions :

1. Work in a well ventilated environment

2. Wear safety equipment

3. Keep paint thinner away from acid substances

4. Keep away from inflammable and explosive materials

5. It is forbidden to use paint thinner as general cleaner

6. Never smoke near