R134 A Work Station ,AC Refrigerant Recovery , Recharge , Vacuum

Quick Descreption

More details :

** Funtion : reclaim / recycle , hunt leakage , vacuum , charge and supply refrigerant oil
** LCD displayer offer operation & service prompt
** High-precision electronic scale weighs the refrigerant filling and reclaiming
** Its purification & filtration system efficiently ensures recovery of used refrigerant
** It adopts unique automatic protection design to prevent liquid attack and ultra-high pressure explosion
** Compact construction and parts versatility help repair and maintenance
** Semi - automatic operation

Technicial Data

* Application refrigerant : R134a
* Power supply : AC 220V ± 10% , 50 / 60Hz
* Recovery rate : 95% , stop at 0bar automatically
* Vapor refrigerant recovery speed : 300g / min
* Liquid refrigerant recovery speed : 200g / min
* Charge speed : 800g / min
* Vacuum speed : 3600L / Hour
* Max. refrigerant weight in gas cylinder :10kg
* Load cell accuracy for gas cylinder : ± 10g
* New/old oil bottle capacity : 250ml
* Max work pressure : 17.5bar
* Dimension:Carton : 68 x 64 x 119cm = 0.520 cbm
plywood : 71 x 67 x 132cm = 0.630 cbm
* Gross Weight : 75kg ( carton ) / 85kg ( plywood )

Operation Process:

1 ) Recover from tank , connect the HP and LP pipes to this devoce, then connect LP to the tank / Cylinder with r134a refrigerant inside. turn the tank up side down.  Set recovery quatity 3 kg. machine with stop when this progress is down

2 ) Recovey from Car , connect HP and LP to the car , Set recovery quantity. This progress Separation of oil and water from

3 ) Vacuum, Set the vacuum time, about 20 mins, it will stop automatically

4 ) Leakage detecting : Detect air conditioning pipeline and seal leaks . Check A/C system for leakage

With compressed gas .  after vacuum , stable for about 5 mins, if the LP pressure keep less than 0 , means no leakage

5 ) Filling :  add new oil into the bottle , about 70 ml, if bigger car, need add more.  after vacuum and hunt leakage , open the valve slowly. New oil and refrigerant refilling can be easily set up
6 ) Recharge : still connect to the car , set the recovery quantity , then recharge into car . if you can't fill easily , pls close the LP , open the HP to charge.

7 ) Draw refrigerant from A/C system and outer refrigerant cylinder , separate impurity such as compressor oil , dirt , moisture , then store good quality refrigerant into inner cylinder