|
[China]
Trade Verify
Address: Room 408 No:262 middle West Lake Road, Shilong Town, Dongguan City ,Guangdong Province, China
Contact name:Mag
JULUN (H.K)CO.,LTD (DONGGUAN JULUN ELECTRONICS CO.,LTD) |
|
Verified Suppliers
|
|
|
10.0Amp Schottky Barrier Rectifiers
The plastic package carries Underwriters Laboratory
Flammability Classification 94V-0
Construction utilizes void-free molded plastic technique
Low reverse leakage
High forward surge current capability
High temperature soldering guaranteed: 250°C,MAX. for 10 seconds
Case : (I)TO-220AB,TO-263,TO-252 molded plastic body
Terminals: Solder plated, solderable per MIL-STD-750, Method 2026
Polarity : As marked
Mounting Position : Any
Ratings at 25
C ambient temperature unless otherwise specified. Single phase
half-wave 60Hz,resistive or inductive load, for capacitive load
current derate by 20%.
| SYMBOLS | MBR (F)CT | MBR (F)CT | MBR (F)CT | MBR (F)CT | MBR (F)CT | MBR (F)CT | MBR (F)CT | UNITS | ||
| Maximum repetitive peak reverse voltage | VRRM | 20 | 40 | 45 | 60 | 100 | 150 | 200 | VOLTS | |
| Maximum RMS voltage | VRMS | 14 | 28 | 32 | 42 | 70 | 105 | 140 | VOLTS | |
| Maximum DC blocking voltage | VDC | 20 | 40 | 45 | 60 | 100 | 150 | 200 | VOLTS | |
| Maximum average forward rectified current (see fig.1) | I(AV) | 10 | Amps | |||||||
| Peak forward surge current 8.3ms single half sine-wave superimposed on rated load (JEDEC Method) | IFSM | 150 | Amps | |||||||
| Maximum instantaneous forward voltage at 5.0A | VF | 0.55 | 0.6 | 0.7 | 0.85 | 0.95 | Volts | |||
| Maximum DC reverse current TA=25 C at rated DC blocking voltage TA=100 C | IR | 0.15 | 0.1 | ma | ||||||
| 40 | 20 | |||||||||
| Typical junction capacitance (NOTE 1) | CJ | 550 | 150 | pF | ||||||
| Typical thermal resistance (NOTE 2) | RqJC | 28 | C/W | |||||||
| Operating junction temperature range | TJ | -55 to +125 | -55 to +150 | C | ||||||
| Storage temperature range | TSTG | -55 to +150 | C | |||||||
Note:1.Measured at 1MHz and applied reverse voltage of 4.0V D.C.
2.Thermal resistance from junction to case
Q: What can i do if i got a broken product form A-TEAM FUSE INC?
A: First of all please tell us as soon as possible after we will
send a new one to you immediately but please send the broken
product to us .you don't have to worry about the carriage charge we
will pay for that.
Q;Are we a importer or manufacturer?
A;We are a manufacturer
Q:Why you have to choose us
A:High quality assurance. The most competitive price and fast
shipping
Please tell me:
What product specifications do you need? when you ask for a
quotation.I will give you the most competitive price per as your
requirements. And we have many types for you to choose.
P.S.:If you can't find any products to meet your requirements.
welcome to send us the details drawings so that we can provide us
our professional & best service to you.
