ABB Module 3HAC17484-9 ABB 3HAC17484-9 SERVO MOTOR AC Excellent Working Condition

ABB Module 3HAC17484-9 ABB 3HAC17484-9 SERVO MOTOR AC Excellent Working Condition

Product Description:

Each of the units connected to the DeviceNet bus includes LED indicators which indicate the
condition of the unit and the function of the network communication.LEDs The LEDs found on the units connected may be divided into two categories.Common LEDs The following LEDs can be found on all units: MS - Module status NS - Network status Specific LEDs Certain units also include the following LEDs: DeviceNet Tx - DeviceNet network transmit DeviceNet Rx - DeviceNet network receive
MS.This bicolor green/red LED indicates the status of the device. It indicates whether or not the
device has power and is operating properly. The LED is controlled by software. The table
below shows the different states of the MS LED.

Related Product Recommendation:

Product's Character:

No power applied to the device. Check power supply.GREEN steady Device is operating in a normal
condition.If no light, check other LED modes.GREEN flashing Device needs commissioning due to
missing, incomplete or incorrect configuration. The device may be in the stand-by state.Check system parameters.Check messages.RED flashing Recoverable minor fault. Check messages.RED steady The device has an unrecoverable fault.Device may need replacing.RED/GREEN flashing The device is running self test. If flashing for more than a few seconds, check hardware.The 16 analog channels can be configured in two operating modes with DIL switches 

The use of the product: