Allen Bradley Modules 1756-SIM 1756SIM AB 1756 SIM Series B ControlLogix superior quality product

Allen Bradley Modules 1756-SIM 1756SIM AB 1756 SIM Series B ControlLogix superior quality product

Product Description:

When the drive mounted HIM is supplied, it will be connected as Adapter 1 (see Adapter in Chapter 2) and visible from the front of the drive. The HIM can be divided into two sections; Display Panel and Control Panel. The Display Panel provides a means of programming the drive and viewing the various
operating parameters. The Control Panel allows different drive functions to be controlled. Refer to Figure and the sections that follow for a description of the panels.Important: The operation of some HIM functions will depend upon drive parameter settings. The default parameter values allow full HIM
functionality.HIM OPERATION When power is first applied to the drive, the HIM will cycle through a series of displays. These displays will show drive name, HIM ID number and communication status. Upon
completion, the Status Display will be shown. This display shows the current status of the drive (i.e. “Stopped,”“Running,” etc.) or any faults that may be present (“Serial Fault,” etc.). If the HIM software is Series A version3.00

Related Product Recommendation:

Product's Character:

Appendix B provides information about the Block Transfer messages supported by the Remote I/O communications module. In this appendix, you will read about the following: Block transfer status word.
Setting up data files for block transfer messages.Examples of block transfer messages. Block transfer quick reference. Important: This appendix provides detailed examples of block transfer messages. For information about block transfer messages, also refer to Chapter 5.Chapter 1 provides an overview of the
Remote I/O communications module (1203-GD1 module, 1203-GK1 module, and 1336-GM1 board). In this chapter, you will read about the following:Function of the module.Features of the module. Compatible SCANport products and programmable controllers. Parts and hardware of the module. Steps for setting up the module.Required tools and equipment.Description of the Remote I/O Communications Modules The Remote I/O communications module is an optional interface designed to provide a direct, digital link between an AB programmable controller and any one AB SCANport product. A module is required for each product that you want to connect to Remote I/O. There are three types of Remote I/O communications modules

1756-DNB/B DeviceNet Bridge/Scanner Module - Series B AB
1756-DNB/D DeviceNet Bridge/Scanner Module - Series D AB
1756-DNB/E DeviceNet Bridge/Scanner Module - Series E AB
1756-IB16/A Digital Input Module AB
1756-IB16D/A Digital Input Module AB
1756-L1/A Logix5550 Processor AB

1756-L1M1/A Logix5550 Processor AB
1756-L1M2/A Logix5550 Processor AB
1756-L1M3/A Logix5550 Logix5550 Processor AB
1756-L55M12/A 1756-L55/A, 1756-M12/A Logix5555 Processor, 750KB memory, Series A AB
1756-L55M13/A 1756-L55/A, 1756-M13/A Logix5555 Processor, 1.5 MB memory, Series A AB
1756-L55M14/A 1756-L55/A, 1756-M14/A Logix5555 Processor, 3.5 MB memory, Series A AB
1756-L55M16/A 1756-L55/A, 1756-M14/A Logix5555 Processor, 7.5 MB memory, Series A AB
1756-L61/A Logix5561 Logix5561 Processor - 2MB AB
1756-L61/B Logix5561 Logix5561 Processor - 2MB AB
1756-L62/A Logix5562 Logix5562 Processor - 4MB Memory AB
1756-L62/B Logix5562 Logix5562 Processor - 4MB Memory AB
1756-OB16E/A Digital Fused Output Module - Series A AB
1756-PA72/A 1756-PA72 Power Supply - Series A AB

The use of the product: