• Measuring principle operates independently of physical fluid properties such as viscosity or density

• Highest measurement performance for liquids and gases under varying, demanding process conditions.

Device properties

• Mass flow: measurement error ±0.05 % (PremiumCal)

• Medium temperature: -196 to 350 °C (-320 to 662 °F)

• Nominal diameter: DN 8 to 250 (3/8 to 10")

• Remote version with up to 4 I/Os

• Backlit display with touch control and WLAN access

• Standard cable between sensor and transmitter

• Measuring principle

  Coriolis

• Product headline

  Flowmeter with premium accuracy and robustness, as remote version with up to 4 I/Os. Highest measurement performance for liquids and gases under varying, demanding process conditions.

• Sensor features

  Highest process safety – immune to fluctuating and harsh environments. Fewer process measuring points – multivariable measurement (flow, density, temperature). Space-saving installation – no in/outlet run needs. Mass flow: measurement error ±0.05 % (PremiumCal). Medium temperature: -196 to 350 °C (-320 to 662 °F).

• Transmitter features

  Full access to process and diagnostic information – numerous, freely combinable I/Os and fieldbuses. Reduced complexity and variety – freely configurable I/O functionality. Integrated verification – Heartbeat Technology. Remote version with up to 4 I/Os. Backlit display with touch control and WLAN access.

• Nominal diameter range

  DN 8 to 250 (⅜ to 10")

• Wetted materials

  Measuring tube: 1.4539 (904L); 1.4404 (316/316L); Alloy C22, 2.4602 (UNS N06022)
  
  Connection: 1.4404 (316/316L); Alloy C22, 2.4602 (UNS N06022); 1.4301 (F304)

• Measured variables

  Mass flow, density, temperature, volume flow, corrected volume flow, reference density, concentration

• Max. measurement error

  Mass flow (liquid): ±0.10 % (standard), 0.05 % (option)
  
  Volume flow (liquid): ±0.10 %
  
  Mass flow (gas): ±0.35 %
  
  Density (liquid): ±0.0005 g/cm³

• Measuring range

  0 to 2 200 000 kg/h (0 to 80 840 lb/min)

• Max. process pressure

  PN 100, Class 600, 63K

• Medium temperature range

  Standard: –50 to +150 °C (–58…+302 °F)
  
  Option: –50 to +240 °C (–58…+464 °F)
  
  High temperatur option: –50 to +350 °C (–58…+662 °F)
  
  Option: –196 to +150 °C (–320 to +302 °F)

• Ambient temperature range

  Standard: –40 to +60 °C (–40 to +140 °F)
  
  Option: –60 to +60 °C (–76 to +140 °F)

• Sensor housing material

  Standard: 1.4301 (304), corrosion resistant
  
  Option: 1.4404 (316L)
  
  Sensor connection housing (standard): AlSi10Mg, coated
  
  Sensor connection housing (option): 1.4301 (304); 1.4404 (316L); 1.4409 (CF3M) similar to 316L

• Transmitter housing material

  AlSi10Mg, coated; 1.4409 (CF3M) similar to 316L; Polycarbonat

• Degree of protection

  Sensor remote version (standard): IP66/67, type 4X enclosure
  
  Sensor remote version (option): IP69.
  
  Transmitter remote version: IP66/67, Type 4X enclosure
  
  External WLAN antenna: IP67

• Display/Operation

  4-line backlit display with touch control (operation from outside)
  
  Configuration via local display and operating tools possible

• Outputs

  4 outputs:
  4-20 mA HART (active/passive)
  4-20 mA WirelessHART
  4-20 mA (active/passive)
  Pulse/frequency/switch output (active/passive)
  Double pulse output (active/passive)
  Relay output

• Inputs

  Status input
  
  4-20 mA input

• Digital communication

  HART, PROFIBUS DP, PROFIBUS PA, FOUNDATION Fieldbus, Modbus RS485, Profinet, Ethernet/IP, OPC-UA

• Power supply

  DC 24 V
  
  AC 100 to 230 V
  
  AC 100 to 230 V / DC 24 V (non-hazardous area)

• Hazardous area approvals

  ATEX, IECEx, cCSAus, NEPSI, INMETRO, EAC

• Product safety

  CE, C-tick, EAC marking

• Functional safety

  Functional safety according to IEC 61508, applicable in safety-relevant applications in accordance with IEC 61511

• Metrological approvals and certificates

  Calibration performed on accredited calibration facilities (acc. to ISO/IEC 17025)
  
  Heartbeat Technology complies with the requirements for traceable verification according to ISO 9001:2008 – Section 7.6 a (TÜV attestation)
  MI-005 (Liquids other than water, Hydrocarbons, LPG, cryogenic liquids)
  NTEP (Liquids other than water, LPG, cryogenic liquids)
  MC (Liquids other than water, cryogenic liquids)

• Pressure approvals and certificates

  PED, CRN, AD 2000

• Material certificates

  3.1 material
  
  NACE MR0175/MR0103, PMI; welding test acc. to EN ISO, ASME, NORSOK

• Hygienic approvals and certificates

  cGMP