Tommi
Automation(china)Co.,Ltd
Add:No. 466, Zhou City Road, Pudong New Area, Shanghai,China.
TEL:86-21-58111208
Phone:86-18917810582
Skype:MTL-CHINA
QQ: 2068679144
Email:automation_tommi@163.com
3300 XL 8mm Proximity Transducer System
Description :
The 3300 XL 8 mm Proximity Transducer System consists of:
One 3300 XL 8 mm probe,
One 3300 XL extension cable1,
One 3300 XL Proximitor* Sensor2.
The system provides an output voltage that is directly proportional
to the distance between the probe tip and the observed conductive
surface and can measure both static (position) and dynamic
(vibration) values. The system’s primary applications are vibration
and position measurements on fluid-film bearing machines, as well
as Keyphasor* reference and speed measurements3.
The 3300 XL 8 mm system delivers the most advanced performance in
our eddy current proximity transducer systems. The standard 3300 XL
8 mm 5-metre system also fully complies with the American Petroleum
Institute’s (API) 670 Standard (4th Edition) for mechanical
configuration, linear range, accuracy, and temperature stability.
All 3300 XL 8 mm proximity transducer systems provide this level of
performance and support complete interchangeability of probes,
extension cables, and Proximitor sensors, eliminating the need to
match or bench calibrate individual components.
Each 3300 XL 8 mm Transducer System component is
backward-compatible and interchangeable4 with other non-XL 3300
series 5 mm and 8 mm transducer system components5. This
compatibility includes the 3300 5 mm probe, for applications in
which an 8 mm probe is too large for the available mounting
space6,7.
Proximitor Sensor
The 3300 XL Proximitor Sensor incorporates numerous improvements
over previous designs. Its physical packaging allows you to use it
in high-density DINrail installations. You can also mount the
sensor in a traditional panel mount configuration, where it shares
an identical 4-hole mounting “footprint” with older Proximitor
Sensor designs. The mounting base for either option provides
electrical isolation and eliminates the need for separate isolator
plates. The 3300 XL Proximitor Sensor is highly immune to radio
frequency interference, allowing you to install it in fiberglass
housings without adverse effects from nearby radio frequency
signals. The 3300 XL Proximitor Sensor’s improved RFI/EMI immunity
satisfies European CE mark approvals without requiring special
shielded conduit or metallic housings, resulting in lower
installation costs and complexity. The 3300 XL’s SpringLoc terminal
strips require no special installation tools and facilitate faster,
more robust field wiring connections by eliminating screw-type
clamping mechanisms that can loosen.
Ordering Information Probes
3300 XL 8 mm Proximity Probes:
330101 3300 XL 8 mm Probe, 3/8-24 UNF thread, without armor2
330102 3300 XL 8 mm Probe, 3/8-24 UNF thread, with armor2 Part
Number-AXX-BXX-CXX-DXX-EXX
A: Unthreaded Length Option Note: Unthreaded length must be at
least 0.8 inches less than the case length. Order in increments of
0.1 in Length configurations:
Maximum unthreaded length: 8.8 in
Minimum unthreaded length: 0.0 in Example: 0 4 = 0.4 in