180 Degree Turning Over Box Beam Production Line , Drive Chain Type
1. Equipment instruction
This machine is 12 ton chain tilter. Through the chain of
overturning, it can make work piece be located at the right
position. Meanwhile it can be connected with other welding device,
it can be turned into a half-automatic welding machine. It uses
electromagnetic speed variation or frequency control.
2. Technical parameter
a. Model: LF-120
b. Rated load capacity: 12ton
c. Maximum eccentricity: 20mm
d. Overturning motor power: 2*2*4KW
e. Overturning angel: 0-360°
f. Suitable maximum height of work-piece: 2000mm
g. Suitable maximum width of work-piece: 800mm
h. Overturning speed: 520-5200mm/min, frequency control of motor
3. Performance feature
The tilter consists of
frame, overturning structure, overturning limb, balance weight and
The main machine of
frame is one part of welding structure. It adopts with frame type
structure, and all weld joint is in accordance with constant
strengthen welding joint requirement to weld. After welding, it is
used to annealing heat treatment so that it can wipe off welding
internal stress and prevent deformation.
Main function of
overturning structure makes for welding by overturning work-piece.
It is made up of motor, reducer, chain wheel and chain. The reducer
adopts with S series worm gear helical spiral cones reducer + brake
motor drive. It can lock the work-piece turning effectively. It can
reach any position to lock work-piece.
Main function of flip
arm is auxiliary support role. The middle is linked with the frame,
and it can do fixed angel sway around the rotation axes.
The end is linked with
balance weight. The fore end is linked with work-piece by chain.
Without work-piece, flip arm impacts it turning back on balance
weight influence. The distance between two flip arms is more than
800mm. it can make work-piece set conveniently. When putting
work-piece down, flip arm can forward horizontal position by
gravity influences. When it need hand work-piece out, flip arm turn
back because of balance weight influences to make the distance
between two flip arms more than 800mm, then it can hang work-piece
Balance weight is linked
with the back of flip arm. The main function is used for turning
Overturning speed of the
chain is adjustable steplessly. Through adopting with transducer,
it can adjust overturning speed.
4. Supply range and components unit (2 Sets)
a. Constitute: frame, switching mechanism, flip arm, balance weight
b. Random material 1piece
5. Technical document
a. Operation instruction manual
b. Certification, packing list
|12 ton chain tilter turning over machine is suitable to dump truck,
container, box or h beam|| |