Time Control Automatic Self Cleaning Filter High Flow For Waste Water Recycling

Time Control Automatic Self Cleaning Filter High Flow For Waste Water Recycling

Automatic Self Cleaning Filter  Brief introduction
Efficient backwash filter, By linear reciprocating efficient mechanical way to automatically remove particulate impurities on the filter element surface.capable of continuous in-line filter, efficient backwash filter accuracy range is in 100-3000 micron, fit for water and viscous liquids filtered, for viscosity up to 30,000 CP.

Automatic Self Cleaning Filter structure

Automatic Self Cleaning Filter principle

The water flows through the screen and the particles are retained on the inside of the screen of the filter element.

The filtered water then flows out through the outlet.
When the particles accumulated to a certain number and the pressure differential increases to the pre-determined level,

the flushing cycle starts.
It include two steps: First, the automatic drain valve opens on the drainage outlet.

Then, electronic motor drives the cleaning brushes which are inside the screen, the solids are expelled through the drain valve.
Filters continue to supply filtered water even during the flushing cycle.The whole working system is controlled by a smart box which has several control modes: pressure differential, time, manual and PLC.

Automatic Self Cleaning Filter Technical parameters
■Working pressure(min)≥0.18Mpa
■Working pressure(max)≤1.6MPa(customized is available)
■Working temperature ≤65℃
■Power supply: 380 v / 50 Hz (Customized is availabel)
■Cleaning method: brush type
■Adjustable cleaning time: 10-200 seconds

Automatic Self Cleaning Filter material

■Brush holder: 304 stainless steel, 316L stainless steel
■Drain valve, cast iron,copper,stainless steel,PVC,nylon
■Controller: PVC, aluminum
■Seal ring: EPDM rubber
■Cleaning brush: stainless steel, nylon

DLD-FY series self-cleaning filter specification table