All Around Type Hot Melt OPP Labeling Machine No Leaking Glue

Hot Melt Glue OPP Label Labeling Machine

Labeling type: All around

Glue type: hot melt

Container diameter: 35mm-100mm

1.1).easy operation to adjust label cutting knife

1.2).vacuum drum made of high rigid material to reduce friction and static

1.3) rapid changeovers: modular design and quick release change parts have changeovers fast and easy in ten minutes

1.4).using handle to adjust the position of cutting knife is possible and exactly

1.5).vacuum manifold at the lower part of drum and cutter, made of heat & wear resistant material

1.6).automatic label length controller to adjust position of I-MARK

2. Label

label material: OPP, PVC, PAPER etc

label size:as demanded

labeling method: line type

3.1) roll-fed type

3.2) label in-fed from label station is conveyed to label in-feed roll-er through label guide roller

3.3) sensors will check I-MARK of label automatically when label reaches label in-feed Roller

3.4) as soon as the position of I-MARK is confirmed, Encoder will adjust the operation speed of label in-feed roller and then appoint the label cutting position

3.5) label which has been cut is conveyed to vacuum drum

3.6) after checking label attached on vacuum drum by sensor, label is conveyed to glue roller and then inject hot melt on label

3.7) to adjust containers by in-feed star wheel and do labeling in roller zone for the first time and then labeling operation will be done perfectly by side belt.

1. According to hot melt labeling machine technical parameter.
2. Cut the entire pattern, labels will not deformation, the start and the terminal paint glue in net, this paint glue system can save 50% glue, label inaccuracy ± 0.05mm, the top and bottom of the labels press very well, the whole label is smooth, no mismatch, no leaking glue, no opening.

Bellow is our the technical parameter of our Hot Melt Labelling Machinery: