|
[China]
Trade Verify
Address: No.59 Xinhe Road, Shangmugu, Pinghu, Longgang, Shenzhen, Guangdong, China.
Contact name:Manfrid Lee
SHENZHEN SINOMATIC TECHNOLOGY CO., LIMITED |
|
Verified Suppliers
|
|
|
SW300DC 220V 110V DC24V Max Force 2600N Remote Control Swing Gate Operator
DETAILED PRODUCT DESCRIPTION
TECHNICIAL SPECIFICATIONS
| Unit Model | SW300DC |
| Power Supply | AC220V/50Hz |
| Maximum Loading weight | 300kg/Leaf |
| Motor Power | DC24V/50W |
| Driving Method | Screw driving piston type |
| Limit switch | Stop block |
| Gate Moving Speed | 2.5cm/s |
| Max. Single-Leaf Length | 2.5m |
| Remote control Range | ≥30m |
| Recording of Up Remotes | 32 |
| Remote Frequency | 433.92MHz |
| Work Duty | S2 30min |
| Working Temperature | -20℃~70℃ |
MAIN FEATURES
1.Soft start slow stop, automatic close, obstacle detection by
automatic reversng.
2.Interface for GSM, infrared sensor, alarm light, wall button.
3.Back up battery is available.
4.Works with solar panel.
5.Shell material is aluminum, arm is stainless steel.
6.Separate control unit, easy to install.
SW300DC motor * 2pcs.
control box * 1pcs.
control board * 1pcs.
remote control * 2pcs.
manual release key * 1pcs.
user manual*1pcs.
mounting accessories.
Installation Steps
Preparation Before Main Engine Installation
a) Before installing the door opener, please confirm the correct
installation of the door to ensure that the door can be easily
manually operated, and the door safety stopper can effectively
prevent the door to continue moving.
b) Install the electric lock, the distance between the door bottom
and ground should be 40-50mm. If not install the electric lock, the
distance between door bottom and ground should be ≥20mm;
c) The main engine recommended mounting height is about 300 ~ 800mm from the ground, and make sure there are reliable fixed points for mounting brackets.
Cable
In order to ensure the normal operation of the door opener and
protect the cable from damage, please use PVC pipe laying motor,
power cable, and control cables, and separate two PVC pipes to lay
(motor and power cable) and (control cable), respectively.
Mounting brackets
In order to install the main motors firmly, recommend to
use the expansion screws to fix the mounting brackets.
FOR MORE DETAILS, PLEASE CLICK THE BELOW LINK TO DOWNLOAD THE USER
MANUAL.
