|
[China]
Trade Verify
Address: No.59 Xinhe Road, Shangmugu, Pinghu, Longgang, Shenzhen, Guangdong, China.
Contact name:Manfrid Lee
SHENZHEN SINOMATIC TECHNOLOGY CO., LIMITED |
|
Verified Suppliers
|
|
|
DC24V motor with built-in control unit and backup battery Solar system compatible Sliding gate operator
Product description
The PY300DC gate opener designed for residential use, weight up to 300 Kg and operating distance up to 8 meters. The drive mode adopts the rack and gear transmission. This gate opener must be installed inside the enclosure or yard for protection.
Main technical parameters
| Unit Model | PY300DC |
| Power Supply | 220V,50Hz;110V,60Hz |
| Max. Gate Weight | 300KG |
| Motor Power | DC24V,100W |
| Gate Moving Speed | 13 m/min |
| Limit Switch | Electronic limit switch |
| Recording of up Remotes | 25 |
| Decoding / Frequency | Rolling code / 433.92MHz |
| Work Duty | S2 30min |
| Noise | ≤60dB |
| Work Temperature | -20°C~70°C |
| Gross Weight | 12 KG |
| Battery Specification | 12V/9Ah |
FUNCTIONS AND FEATURES
*Built-in control board and 24V/4.5Ah backup battery.
*Intelligent charging system supplied.
*MCU is supplied to control the gate opener.
*Keypad / single button interface.
*Alarm lamp, Photo beam & safety beam interface.
*User can select auto-close function.
*Electronic limit switch and soft start & slow stop function.
*Manual key release design for emergency purposes.
*Automatic stop when hitting obstacle during opening, auto-reverse
when hitting obstacle during closing.
*Solar System compatible
Installation
PY300DC sliding gate opener is applicable to gate weight less than
300kg, and length of the sliding gate less than 8m. The drive mode
adopts the rack and gear transmission. This gate opener must be
installed inside the enclosure or yard for protection.
① Gate opener; ② Wireless keypad (optional); ③ Gate; ④ Infrared
sensor (optional);
⑤ Alarm lamp (optional); ⑥ Safety stop block; ⑦ Gear rack; ⑧ Remote
control;
Preparation work before installation
Please make sure that the sliding gate is correctly installed, the gate rail is horizontal, and the gate can be manually moved smoothly before installing the gate opener.
Cable installation
In order to guarantee the normal operation of the gate opener and protect the cables from damages, please bury the motor & power cable and controlling cable separately with two PVC tubes.
Concrete pedestal
Please precast a concrete pedestal with the size can be 400mm x 250mm, depth be 200mm in advance, so as to firmly install PY300DC gate opener. Please make sure the distance between the gate and gate opener is appropriate before casting the pedestal.
For more info, please refer to the below user manual
