Silver Color Aluminum Automatic Sliding Gate Opener Heavy Duty With Remote Control

Gear Drive Heavy Duty Silver Color Aluminum Automatic Sliding Gate Openerwith Remote Control

About the gate operator

This equipment is one of the auto gate openers launched by our company adopting a new design and integrated control system.

This sliding gate opener has many features such as: low noise, light weight, powerful starting torque, stability, reliability and is compact and stylish. The motor will still work for a short period of time using lower voltage.

The control board has overload protection.When there is a power failure, the motor drive can be separated by the use of the clutch, by using the specified key the user has the ability to disconnect the clutch enabling the gate to be opened or closed manually.

Using the optional infrared photocells the gate will automatically stop and re-open if an obstacle is sensed.

Function and features

1) Integrated mechanical and eletrical,all functions on one controller

2) Radio controller or linesto control open,close and stop functions

3) Magenetic limit switch,the door stops when it moves to the limit

4) Accurate limit braking

5) Electronic soft-start

6) Dialing switches to adjust the motor rotation in both directions

7) Open and close limits have a self-locking function

8) Intelligent operation-if an obstacle is detected when the door is closing,it will reverse to open,then after 10 seconds it attempts to close automatically unless you press the stop key-stroke.

9) Movement indication-the indicator lights up when the door is moving.

10) Optional line control or remote control

Trouble shooting

1 The motor runs but the sliding gate operator doesn't work.
A: Check whether the clutch is closed.

2 The power indicator light doesn't flash and the key doesn't react.
A: Check whether power is connected right.
B: Check whether the fusel is burned, it yes, please exchange it.

3 The opening and closing limit can not work.

A: Check whether the limit adjustment switch is installed right.
B: Check whether the limit iron is installed right. Adjust the position of the limit iron.

4 Crash proof is not effective.
A: Check whether the connection of crash proof is correct.
B: Check whether the photocell is installed right.
C: Check whether the connection of the wire of the loop detector is right .

5 When the gate just close up, it turns to open.
A: Check whether the voltage is normal.
B: If the crash proof equipment is installed, please check whether it works well.

6 The remote control doesn't work
A: Check whether the battery is low. If yes, change it.
B: Check whether the code of the remote control is the same with the code of the control panel.