IP45 SS316 0.2S Full Height Turnstiles 40W ISO With Mechanical Rotating

Floor-To-Ceiling Full Height Turnstiles With Mechanical Rotating Barriers

PRODUCT DESCRIPTION

Full Height Turnstile Definition: Full height turnstiles are floor-to-ceiling turnstiles with mechanical rotating barriers.

They operate similarly to a revolving door with the only difference being that they allow access to one person at a time

by locking after a single person makes entry into the system.

APPLICATIONS

The Full Height Turnstile can be widely used in some high security places, typical areas of application are: prison, stadium,

parking system area , and so on.

OPTIONAL & CUSTOMIZED FUNCTIONS

> Alternative Materials, Finishes and Custom Design

> Usage LED Counter function

> Audio and visual alarm in the event of an invalid entry or exit and tailgating

> Extra add sensors transmitter and receiver type

> Infrared sensors reset function

> Access Control System Integration

> Camera System Integration

> Thermostat System Integration

STANDARD FEATURES & FUNCTIONS

> The turnstile system can easily integrates with the 3rd party equipment, such as Biometric reader,consumption system,

ESD system and access control system etc, Rapid identification technique, available to identify accurately and efficiently

the magnetic card, bar code card, ID/IC card etc.

> Operation model: Both directions can be set as controlled mode or free mode, two or one direction can be controlled by

switch- button or access controller.

> Available with 4-arm, 90 degree spacing (default) or 3-arm, 120 degree spacing (optional).

> Anti backup function: to prevent reverse rotation once the mechanism has move 60 degree from home.

> The running status of device can be set up through pressing the built-in small keyboard of the main control board.

> When power off, the center rotor will be set free model (default) or be locked model (optional).

> Reset automatically function: Go signal will be cancelled if passage through is not completed within pre-set time.

The standard default is 10 seconds (time adjustable by changing parameter of main control board).

> Remote control and management function: Through the management computer to realize remote control and management.

PRODUCT SPECIFICATIONS

OPERATION MODELS

The turnstile provides bi-directional access control. Each direction may be in one of three states:

> Free passage: all person are authorized to pass under all conditions

> Controlled access: each person must use a card reader before being authorized to pass

> Lane closed: no persons are authorized to pass, and security cards are ignored