|
[China]
Trade Verify
Address: No.59 Xinhe Road, Shangmugu, Pinghu, Longgang, Shenzhen, Guangdong, China.
Contact name:Manfrid Lee
SHENZHEN SINOMATIC TECHNOLOGY CO., LIMITED |
|
Verified Suppliers
|
|
|
Access Control Pedestrian Security Swing Arm Turnstile For hospital Entrance
Working principle
1). Turn on the power, turnstile enter the self-check mode ,The arm turn and lock up automatically.System enter into work mode after beep sound
2). After swipe legal card or QR code and fingerprint, Access control device send opening signal to main board.
3). When the control board receives opening signal, the indicator and motor trigger valid signal. Then the indicator turns to green, arm turn small angle.
4) If push arm without permissions, turnstile control board alarm ,arms will be locked automatically, and then reset.
PRODUCT PARAMETER
| Product name | Swing barrier |
| Material | 304 Stainless steel |
| Working voltage | 220V,50Hz/ 110V, 60Hz |
| Channel width(single unit) | 600mm |
| Passing speed | 30 persons/min |
| Opening time | 0.2s |
| Open signal | Dry Contact |
| Working environments | Indoor or outdoor (under shed) |
| Size | 1200x280x1000mm |
| Gross weight | 70KG |
| Ambient temperature | -25 °C ~ +70 °C |
| Humidity | ≤90% no condensation |
| Normal life | 5 million times |
PRODUCT PHOTO
Features & function of swing arm barrier
1.The electric control adopts DC motor to drive stable and reliable, and has low failure rate.
2. Ultra high light traffic indicator function: directional instructions are designed with ultra bright LED lights, indicating more prominently;
3. In the case of the person who has not swiped the card into the passageway, the equipment alarm will prompt the traveler to swipe the card.
4. Trigger to open by dry contact (NC) and close by dry contact (NO). This allowed access control reader to control swing barrier opening and closing time.
5. During power failure, swing barrier will automatically open up to allow free access. When power resume, swing barrier will automatically close back to resume security level.
6. Built in clutch that will automatically disengage motor drive from gearbox when the gate is obstructed. Clutch release reduce impact force to minimum in the event that gate closed onto passing users. This also protect the motor and control panel from being damaged due to overload.
7. Optional safety IR beam can be added to auto reverse the gate upon detecting obstacle in the passage way. This way the gate is reversed before even hitting user that is still in the passage way. More safety to the user.
8. Gate length can be easily customized to fit site requirement.
9. Auto synchronized opening when 2 swing barriers are installed for the same passage. Both side will open and close at the same time.
10. Gate motor mechanism is self lock at open and close position.
11. Support bi-directional opening
12. Can integrate with access control system.
13. Trigger to open by dry contact. Automatic close back after auto timer elapsed. Delay time can be programmed on swing barrier control panel.
